Electric Circuits · ⁨الدوائر الكهربائية⁩

Learning Objective 11.2.A: Describe the behavior of a circuit.

• 11.2.A.1 A circuit is composed of electrical loops, which can include wires, batteries, resistors, lightbulbs, capacitors, inductors, switches, ammeters, and voltmeters.
• 11.2.A.2 A closed electrical loop is a closed path through which charges may flow.
  • 11.2.A.2.i A closed circuit is one in which charges would be able to flow.
  • 11.2.A.2.ii An open circuit is one in which charges would not be able to flow.
  • 11.2.A.2.iii A short circuit is one in which charges would be able to flow with no change in potential difference.
• 11.2.A.3 A single circuit element may be part of multiple electrical loops.
• 11.2.A.4 Circuit schematics are representations used to describe and analyze electric circuits.
  • 11.2.A.4.i The properties of an electric circuit are dependent on the physical arrangement of its constituent elements.
  • 11.2.A.4.ii Circuit elements have common symbols that are used to create schematic diagrams. Variable elements are indicated by a diagonal strikethrough arrow across the standard symbol for that element. (Symbols: Battery, Bulb, Switch, Capacitor, Resistor, Ammeter, Voltmeter, Inductor.)

Boundary statement: Unless otherwise specified, all circuit schematic diagrams will be drawn using conventional current.

Learning Objective 11.3.A: Describe the resistance of an object using physical properties of that object.

• 11.3.A.1 Resistance is a measure of the degree to which an object opposes the movement of electric charge.
• 11.3.A.2 The resistance of a resistor with uniform geometry is proportional to its resistivity and length and is inversely proportional to its cross-sectional area.
  • Equation: $R = \dfrac{\rho\ell}{A}$
  • 11.3.A.2.i Resistivity is a fundamental property of a material that depends on its atomic and molecular structure and quantifies how strongly the material opposes the motion of electric charge.
  • 11.3.A.2.ii The resistivity of a conductor typically increases with temperature.
  • 11.3.A.2.iii The total resistance of a resistor with uniform geometry, but that is made of a material whose resistivity varies along the length of the resistor, is given by $R = \int \dfrac{\rho(\ell)\,d\ell}{A}$.

Learning Objective 11.3.B: Describe the electrical characteristics of elements of a circuit.

• 11.3.B.1 Ohm's law relates current, resistance, and potential difference across a conductive element of a circuit.
  • Equation: $I = \dfrac{\Delta V}{R}$
  • 11.3.B.1.i Materials that obey Ohm's law have constant resistance for all currents and are called ohmic materials.
  • 11.3.B.1.ii The resistivity of an ohmic material is constant regardless of temperature.
  • 11.3.B.1.iii Resistors can also convert electrical energy to thermal energy, which may change the temperature of both the resistor and the resistor's environment.
  • 11.3.B.1.iv The resistance of an ohmic circuit element can be determined from the slope of a graph of the current in the element as a function of the potential difference across the element.

Learning Objective 11.4.A: Describe the transfer of energy into, out of, or within an electric circuit, in terms of power.

• 11.4.A.1 The rate at which energy is transferred, converted, or dissipated by a circuit element depends on the current in the element and the electric potential difference across it.
  • Equation: $P = I\Delta V$
  • Equation: $P = I^2 R = \dfrac{\Delta V^2}{R}$
• 11.4.A.2 The brightness of a lightbulb increases with power, so power can be used to qualitatively predict the brightness of lightbulbs in a circuit.

Boundary statement: AP Physics C: Electricity & Magnetism only expects students to analyze the transfer of mechanical and electrical energy, although students should be aware that electrical energy can also be dissipated in the form of thermal energy.

Learning Objective 11.5.A: Describe the equivalent resistance of multiple resistors connected in a circuit.

• 11.5.A.1 Circuit elements may be connected in series and/or in parallel.
  • 11.5.A.1.i A series connection is one in which any charge passing through one circuit element must proceed through all elements in that connection and has no other path available. The current in each element in series must be the same.
  • 11.5.A.1.ii A parallel connection is one in which charges may pass through one of two or more paths. Across each path, the potential difference is the same.
• 11.5.A.2 A collection of resistors in a circuit may be analyzed as though it were a single resistor with an equivalent resistance $R_{\text{eq}}$.
  • 11.5.A.2.i The equivalent resistance of a set of resistors in series is the sum of the individual resistances.
    • Equation: $R_{\text{eq},s} = \sum_{i} R_i$
  • 11.5.A.2.ii The inverse of the equivalent resistance of a set of resistors connected in parallel is equal to the sum of the inverses of the individual resistances.
    • Equation: $\dfrac{1}{R_{\text{eq},p}} = \sum_{i} \dfrac{1}{R_i}$
  • 11.5.A.2.iii When resistors are connected in parallel, the number of paths available to charges increases, and the equivalent resistance of the group of resistors decreases.

Learning Objective 11.5.B: Describe a circuit with resistive wires and a battery with internal resistance.

• 11.5.B.1 Ideal batteries have negligible internal resistance. Ideal wires have negligible resistance.
  • 11.5.B.1.i The resistance of wires that are good conductors may normally be neglected, because their resistance is much smaller than that of other elements of a circuit.
  • 11.5.B.1.ii The resistance of wires may only be neglected if the circuit contains other elements that do have resistance.
  • 11.5.B.1.iii The potential difference a battery would supply if it were ideal is the potential difference measured across the terminals when there is no current in the battery and is sometimes referred to as its $\mathrm{emf}$ ($\mathcal{E}$).
• 11.5.B.2 The internal resistance of a nonideal battery may be treated as the resistance of a resistor in series with an ideal battery and the remainder of the circuit.
• 11.5.B.3 When there is current in a nonideal battery with internal resistance $r$, the potential difference across the terminals of the battery is reduced relative to the potential difference when there is no current in the battery.
  • Equation: $\Delta V_{\text{terminal}} = \mathcal{E} - Ir$

Learning Objective 11.5.C: Describe the measurement of current and potential difference in a circuit.

• 11.5.C.1 Ammeters are used to measure current at a specific point in a circuit.
  • 11.5.C.1.i Ammeters must be connected in series with the element in which current is being measured.
  • 11.5.C.1.ii Ideal ammeters have zero resistance so that they do not affect the current in the element that they are in series with.
• 11.5.C.2 Voltmeters are used to measure electric potential difference between two points in a circuit.
  • 11.5.C.2.i Voltmeters must be connected in parallel with the element across which potential difference is being measured.
  • 11.5.C.2.ii Ideal voltmeters have infinite resistance so that no charge flows through them.
• 11.5.C.3 Nonideal ammeters and voltmeters will change the properties of the circuit being measured.

Boundary statement: Unless otherwise stated, all batteries, wires, and meters are assumed to be ideal. Circuits with batteries of different potential differences connected in parallel will not be assessed.

Learning Objective 11.6.A: Describe a circuit or elements of a circuit by applying Kirchhoff's loop rule.

• 11.6.A.1 Energy changes in simple electrical circuits may be represented in terms of charges moving through electric potential differences within circuit elements.
  • Equation: $\Delta U_E = q\Delta V$
• 11.6.A.2 Kirchhoff's loop rule is a consequence of the conservation of energy.
  • 11.6.A.2.i Kirchhoff's loop rule states that the sum of potential differences across all circuit elements in a single closed loop must equal zero.
    • Equation: $\sum \Delta V = 0$
  • 11.6.A.2.ii The values of electric potential at points in a circuit can be represented by a graph of electric potential as a function of position within a loop.

Learning Objective 11.7.A: Describe a circuit or elements of a circuit by applying Kirchhoff's junction rule.

• 11.7.A.1 Kirchhoff's junction rule is a consequence of the conservation of electric charge.
• 11.7.A.2 Kirchhoff's junction rule states that the total amount of charge entering a junction per unit time must equal the total amount of charge exiting that junction per unit time.
  • Equation: $\sum I_{\text{in}} = \sum I_{\text{out}}$

Learning Objective 11.8.A: Describe the equivalent capacitance of multiple capacitors.

• 11.8.A.1 A collection of capacitors in a circuit may be analyzed as though it was a single capacitor with an equivalent capacitance $C_{\text{eq}}$.
  • 11.8.A.1.i The inverse of the equivalent capacitance of a set of capacitors connected in series is equal to the sum of the inverses of the individual capacitances.
    • Equation: $\dfrac{1}{C_{\text{eq},s}} = \sum_{i} \dfrac{1}{C_i}$
  • 11.8.A.1.ii The equivalent capacitance of a set of capacitors in series is less than the capacitance of the smallest capacitor.
  • 11.8.A.1.iii The equivalent capacitance of a set of capacitors in parallel is the sum of the individual capacitances.
    • Equation: $C_{\text{eq},p} = \sum_{i} C_i$
• 11.8.A.2 As a result of conservation of charge, each of the capacitors in series must have the same magnitude of charge on each plate.

Learning Objective 11.8.B: Describe the behavior of a circuit containing combinations of resistors and capacitors.

• 11.8.B.1 The charge on a capacitor or the current in a resistor in an RC circuit can be described by a fundamental differential equation derived from Kirchhoff's loop rule.
  • Equation: $\mathcal{E} = \dfrac{dq}{dt}R + \dfrac{q}{C}$
• 11.8.B.2 The time constant ($\tau$) is a significant feature of an RC circuit.
  • 11.8.B.2.i The time constant of an RC circuit is a measure of how quickly the capacitor will charge or discharge and is defined as $\tau = R_{\text{eq}}C_{\text{eq}}$.
  • 11.8.B.2.ii For a charging capacitor, the time constant represents the time required for the capacitor's charge to increase from zero to approximately 63 percent of its final asymptotic value.
  • 11.8.B.2.iii For a discharging capacitor, the time constant represents the time required for the capacitor's charge to decrease from fully charged to approximately 37 percent of its initial value.
• 11.8.B.3 The potential difference across a capacitor and the current in the branch of the circuit containing the capacitor each change over time as the capacitor charges and discharges, but both will reach a steady state after a long time interval.
  • 11.8.B.3.i Immediately after being placed in a circuit, an uncharged capacitor acts like a wire, and charge can easily flow to or from the plates of the capacitor.
  • 11.8.B.3.ii As a capacitor charges, changes to the potential difference across the capacitor affect the charge on the plates of the capacitor, the current in the circuit branch in which the capacitor is located, and the electric potential energy stored in the capacitor.
  • 11.8.B.3.iii The potential difference across a capacitor, the current in the circuit branch in which the capacitor is located, and the electric potential energy stored in the capacitor all change with respect to time and asymptotically approach steady state conditions.
  • 11.8.B.3.iv After a long time, a charging capacitor approaches a state of being fully charged, reaching a maximum potential difference at which there is zero current in the circuit branch in which the capacitor is located.
  • 11.8.B.3.v Immediately after a charged capacitor begins discharging, the amount of charge on the capacitor and the energy stored in the capacitor begin to decrease.
  • 11.8.B.3.vi As a capacitor discharges, the amount of charge on the capacitor, the potential difference across the capacitor, and the current in the circuit branch in which the capacitor is located all decrease until a steady state is reached.
  • 11.8.B.3.vii After either charging or discharging for times much greater than the time constant, the capacitor and the relevant circuit branch may be modeled using steady-state conditions.