Skip to content

IGCSE Physics · November 2023 · Paper 63 · Difficulty 4 · Challenging

Question 2

2

A student investigates the cooling of hot water in surroundings with different temperatures.

He uses the apparatus shown in Fig. 2.1.

(a)

The student pours 100 cm$^{3}$ of cold water into beaker B and places the thermometer in the water.

Measure, and record in the appropriate column heading of Table 2.1, the temperature $\theta_{1}$ of the water, as shown in Fig. 2.2.[1]

(b)

The student places beaker A inside beaker B as shown in Fig. 2.3 so that the water in beaker B rises between the sides of the two beakers.

He removes the lid and pours 150 cm$^{3}$ of hot water into beaker A. He replaces the lid and puts the thermometer into the hot water in beaker A.

He records, in Table 2.1, the temperature $\theta_{A}$ of the water every 30 s.

Describe one precaution that can be taken to ensure that the temperature readings are as accurate as possible.[1]

(c)

The student repeats the process for water at a higher temperature $\theta_{2}$ in beaker B.

His readings are shown in Table 2.1.

beaker A in cold waterbeaker A in warm water
$\theta_{1} = ...................^{\circ}C$$\theta_{2} = 48^{\circ}C$
$t/s$$\theta_{A}/ ^{\circ}C$$\theta_{A}/ ^{\circ}C$
078.580.0
3072.577.0
6069.074.5
9066.573.0
12065.071.5
15063.570.5
18062.070.0

Write a conclusion stating in what way the temperature of the water surrounding beaker A affects the rate of cooling of the hot water in beaker A.

Justify your answer by reference to values from the readings.[2]

(d)

Calculate the average cooling rate $R$ for beaker A cooling in cold water. Use the readings for beaker A from Table 2.1 and the equation

$$R = \frac{\theta_{A0} - \theta_{A180}}{T}$$

where $T = 180\text{ s}$ and $\theta_{A0}$ and $\theta_{A180}$ are the temperatures of the water in beaker A at $t = 0$ and $t = 180\text{ s}$. Include the unit for the cooling rate.[2]

$R = .........................................................$

(e)

Another student repeats this experiment at the same room temperature.

State two other variables that she controls in order to obtain readings as close as possible to the readings in Table 2.1.[2]

1

2

(f)

After 180 s, the student measures the temperature of the water surrounding beaker A in the first experiment and finds that $\theta_{1} = 49^{\circ}C$.

(i)

State the reason why this can affect the results of the investigation and suggest what effect it has on the value of cooling rate $R$.[2]

reason

effect on $R$

(ii)

Suggest one change to the experiment to reduce the effect in (f)(i).[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Read the thermometer: $\theta_1 = \mathbf{18}\,^{\circ}\mathrm{C}$.

2(b)

  • Keep the thermometer bulb away from the beaker wall, so it measures the water temperature.

2(c)

  • The hot water cools more slowly when the surrounding water is warmer.
  • In 180 s it falls by $16.5\,^{\circ}\mathrm{C}$ in cold water, but by only $10.0\,^{\circ}\mathrm{C}$ in warm water.

2(d)

  • Use $R = (\theta_{A0}-\theta_{A180})/T$.
  • $R = (78.5\,^{\circ}\mathrm{C}-62.0\,^{\circ}\mathrm{C})/180\,\mathrm{s} = \mathbf{0.092}\,^{\circ}\mathrm{C/s}$.

2(e)

  • Keep the volume of water in each beaker the same as in the first experiment.
  • Keep the initial water temperatures the same as in the first experiment.

2(f)(i)

  • The surrounding water warms up, so its temperature is not constant during the experiment.
  • The temperature difference becomes smaller, reducing the cooling rate $R$.

2(f)(ii)

  • Use a larger volume of surrounding water so its temperature changes less.
Original question

Log in or create account

IGCSE, A-Level & AP