Skip to content

IGCSE Physics · November 2022 · Paper 63 · Difficulty 3 · Standard

Question 2

2

A student performs an experiment on the cooling of water contained in a beaker. He investigates the effect of the colour of the outside surface of the beaker on the rate of cooling.

He uses the apparatus shown in Fig. 2.1.

Beaker A is covered with black card.

Beaker B is covered with shiny metal foil.

(a)

Record room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.

$\theta_R$ = [1]

(b)

The student pours a volume of 150 cm$^3$ of hot water into beaker A and records the temperature $\theta$ at time $t = 0$.

(i)

Describe one precaution that can be taken to ensure that the temperature reading is as accurate as possible.

[1]

He records, in Table 2.1, the temperature of the water in the beaker every 30 s.

The student repeats the process for beaker B.

(ii)

Add units to the column headings in Table 2.1.[1]

Table 2.1

beaker A with black cardbeaker B with shiny metal foil
$t/$$\theta/$$\theta/$
086.085.5
3080.583.5
6076.082.0
9073.080.5
12071.079.5
15069.579.0
18068.578.5
(c)

Write a conclusion stating if the colour of the outside surface of the beaker affects the rate of cooling of the water in the beaker.

Justify your answer by reference to values from the results.

[2]

(d)
(i)

Calculate the average cooling rate $x_A$ for the water in beaker A during the experiment.

Use the readings for beaker A from Table 2.1 and the equation

$$x_A = \frac{\theta_0 - \theta_{180}}{T}$$

where $T = 180\text{ s}$ and $\theta_0$ and $\theta_{180}$ are the temperatures of the water in beaker A at times $t = 0$ and $t = 180\text{ s}$.

Include the unit for the cooling rate.

$x_A$ = [1]

(ii)

Calculate the average cooling rate $x_B$ for the water in beaker B during the experiment.

Use the readings for beaker B from Table 2.1 and the equation

$$x_B = \frac{\theta_0 - \theta_{180}}{T}$$

where $T = 180\text{ s}$ and $\theta_0$ and $\theta_{180}$ are the temperatures of the water in beaker B at times $t = 0$ and $t = 180\text{ s}$.

Include the unit.

$x_B$ = [1]

(e)
(i)

A student states that the black card is a thermal insulator. He thinks this will affect the result.

Suggest an additional experiment to test this theory.

[1]

(ii)

Suggest two variables which should be kept the same for the additional experiment so that the comparison with this experiment is fair. Assume that the same type of beaker is used.

[2]

(iii)

State how the cooling rate of beaker A from the additional experiment is likely to compare with $x_A$ from (d)(i) if the student’s theory is correct. Explain your answer.

statement

explanation

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • The room temperature is $\theta_R = \mathbf{22}\,\mathrm{°C}$.

2(b)(i)

  • Keep the thermometer bulb away from the beaker sides and base so it measures the water temperature.

2(b)(ii)

  • Use $t/\mathrm{s}$ for time and $\theta/\mathrm{°C}$ for the temperature in each beaker.

2(c)

  • Yes. The water in the black-covered beaker cools faster than the water in the shiny-covered beaker.
  • Use $\Delta\theta = \theta_0-\theta_{180}$. In $180\,\mathrm{s}$, A cools by $86.0\,\mathrm{°C}-68.5\,\mathrm{°C}=\mathbf{17.5}\,\mathrm{°C}$; B cools by $85.5\,\mathrm{°C}-78.5\,\mathrm{°C}=\mathbf{7.0}\,\mathrm{°C}$.

2(d)(i)

  • Use $x_A = (\theta_0-\theta_{180})/T$.
  • $x_A = (86.0-68.5)\,\mathrm{°C}/180\,\mathrm{s} = \mathbf{0.097}\,\mathrm{°C/s}$.

2(d)(ii)

  • Use $x_B = (\theta_0-\theta_{180})/T$.
  • $x_B = (85.5-78.5)\,\mathrm{°C}/180\,\mathrm{s} = \mathbf{0.039}\,\mathrm{°C/s}$.

2(e)(i)

  • Repeat the experiment with the outside of beaker A painted black instead of covered in black card.

2(e)(ii)

  • Keep the starting temperature of the water the same.
  • Keep the volume of water the same.

2(e)(iii)

  • The cooling rate should be greater than $x_A$: removing the insulating card lets heat escape more quickly.
Original question

Log in or create account

IGCSE, A-Level & AP