Skip to content

IGCSE Physics · November 2022 · Paper 63 · Difficulty 3 · Standard

Question 3

3

Some students investigate circuits containing resistors in parallel. They use the circuit shown in Fig. 3.1.

All numeric answers must have appropriate units.

Fig. 3.1
(a)

On Fig. 3.1, complete the circuit to show a voltmeter connected to measure the potential difference (p.d.) across the parallel combination of resistors P and Q.[1]

(b)

A student measures the potential difference $V$ across the parallel combination of resistors P and Q and measures the current $I_{\text{T}}$ in the circuit. The readings are shown in Fig. 3.2 and Fig. 3.3.

(i)

Read the values of $V$ and $I_{\text{T}}$ shown on the meters in Fig. 3.2 and Fig. 3.3.

$V =$

$I_{\text{T}} =$ [2]

(ii)

Calculate the resistance $R_{\text{PQ}}$ of the parallel combination of resistors P and Q. Use your readings from (b)(i) and the equation $R_{\text{PQ}} = \frac{V}{I_{\text{T}}}$.

$R_{\text{PQ}} =$ [2]

(c)

The student connects the voltmeter to measure the potential difference $V_{\text{S}}$ across resistor S. The reading is shown in Fig. 3.4.

Read the value of the potential difference $V_{\text{S}}$ across resistor S shown in Fig. 3.4.

$V_{\text{S}} =$

Calculate the resistance $R_{\text{S}}$ of resistor S. Use your readings from (c) and (b)(i) and the equation $R_{\text{S}} = \frac{V_{\text{S}}}{I_{\text{T}}}$.

$R_{\text{S}} =$ [1]

(d)

The student connects the ammeter to measure the current $I_{\text{P}}$ in resistor P. He then connects the ammeter to measure the current $I_{\text{Q}}$ in resistor Q. The readings are shown in Fig. 3.5 and Fig. 3.6.

(i)

Read the value of the current $I_{\text{P}}$ in resistor P shown in Fig. 3.5.

$I_{\text{P}} =$

Read the value of the current $I_{\text{Q}}$ in resistor Q shown in Fig. 3.6.

$I_{\text{Q}} =$ [1]

(ii)

A student suggests that $I_{\text{T}}$ from (b)(i) should be equal to $I_{\text{P}} + I_{\text{Q}}$. State whether your results support this suggestion. Justify your statement by reference to values from your results.

statement

justification [2]

(e)
(i)

A student changes the circuit and uses a variable resistor to control the current in the circuit. In the space provided, draw the circuit symbol for a variable resistor.

Mark with an X on Fig. 3.1 where a variable resistor is connected to control the current in resistor S without affecting the resistance of either of the parallel branches.[1]

(ii)

The current in the circuit can be controlled by connecting a range of different resistors in place of resistors P and Q. State one disadvantage of this method instead of using a variable resistor to control the current.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Connect a voltmeter symbol in parallel across the combination of P and Q.

3(b)(i)

  • The readings are $V = \mathbf{1.4}\,\mathrm{V}$ and $I_T = \mathbf{0.76}\,\mathrm{A}$.

3(b)(ii)

  • Use $R_{PQ} = V/I_T$.
  • $R_{PQ} = 1.4\,\mathrm{V}/0.76\,\mathrm{A} = \mathbf{1.8}\,\Omega$ to two significant figures.

3(c)

  • Each small division on the voltmeter is $0.1\,\mathrm{V}$, so $V_S = \mathbf{3.8}\,\mathrm{V}$.
  • Use $R_S = V_S / I_T$ to find the resistance.
  • $R_S = 3.8\,\mathrm{V} / 0.76\,\mathrm{A} = \mathbf{5.0}\,\mathrm{\Omega}$.

3(d)(i)

  • Each small division is $0.02\,\mathrm{A}$. Fig. 3.5 reads $I_P = \mathbf{0.20}\,\mathrm{A}$.
  • Fig. 3.6 reads one small division above $0.50\,\mathrm{A}$, so $I_Q = \mathbf{0.52}\,\mathrm{A}$.

3(d)(ii)

  • The results support the suggestion: $I_P + I_Q = 0.20\,\mathrm{A} + 0.52\,\mathrm{A} = 0.72\,\mathrm{A}$, close to $I_T = 0.76\,\mathrm{A}$.
  • The readings agree within the limits of experimental accuracy.

3(e)(i)

  • Draw a resistor rectangle with a diagonal arrow through it. Mark X on the series part of the circuit, outside both parallel branches.

3(e)(ii)

  • Separate fixed resistors do not allow the current to be adjusted continuously.
Original question

Log in or create account

IGCSE, A-Level & AP