Skip to content

IGCSE Physics · June 2025 · Paper 63 · Difficulty 3 · Standard

Question 2

2

A student investigates the cooling of hot water in a beaker.

She uses the apparatus shown in Fig. 2.1.

(a)

Record room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.

$\theta_R$ = [1]

(b)

The student pours hot water into the beaker and records the initial temperature $\theta$ in Table 2.1. She then records the temperature $\theta$ every 30 s. Her values are shown in Table 2.1.

Describe one technique that you use to ensure that temperature readings in this type of experiment are as accurate as possible.

[1]

Table 2.1

t/s$\theta$/°C
093.0
3090.5
6088.5
9087.0
12085.5
15084.0
18083.0
21082.0
24081.5
27081.0
(c)

Estimate what the temperature $\theta_{300}$ is at 300 s. Use the readings from Table 2.1 to guide you.

$\theta_{300}$ = °C[1]

(d)
(i)

Calculate the average cooling rate $x_1$ during the first 90 s of the experiment. Use the readings from Table 2.1 and the equation:

$x_1 = \frac{\theta_0 - \theta_{90}}{T}$

where $T = 90\text{ s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90\text{ s}$.

Include the unit for the cooling rate.

$x_1$ = [1]

(ii)

Calculate the average cooling rate $x_2$ during the middle 90 s of the experiment. Use the readings from Table 2.1 and the equation:

$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$

where $T = 90\text{ s}$ and $\theta_{90}$ and $\theta_{180}$ are the temperatures at $t = 90\text{ s}$ and $t = 180\text{ s}$.

$x_2$ = [1]

(iii)

Calculate the average cooling rate $x_3$ during the last 90 s of the experiment. Use the readings from Table 2.1 and the equation:

$x_3 = \frac{\theta_{180} - \theta_{270}}{T}$

where $T = 90\text{ s}$ and $\theta_{180}$ and $\theta_{270}$ are the temperatures at $t = 180\text{ s}$ and $t = 270\text{ s}$.

$x_3$ = [1]

(e)
(i)

Use your results from (d) to describe the overall pattern of the rate of cooling of the water in the experiment. Justify your answer by reference to your results.

[1]

(ii)

Estimate the final temperature $\theta_F$ of the water after several hours.

$\theta_F$ = [1]

(f)
(i)

Another student does the same experiment. He starts with the hot water at a lower initial temperature.

Suggest how his cooling rates are likely to compare with those in (b). Use your results to explain your answer.

suggestion

explanation

[2]

(ii)

State one variable, other than the initial water temperature, that the student needs to control.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Read the thermometer scale: $\theta_R = \mathbf{21}\,\mathrm{^\circ C}$.

2(b)

  • Read the thermometer at eye level, looking straight at the scale, to avoid parallax error.

2(c)

  • The temperature is falling more slowly near the end, so a sensible estimate is $\theta_{300} = \mathbf{80.5}\,\mathrm{^\circ C}$.

2(d)(i)

  • Use $x_1 = (\theta_0-\theta_{90})/T$.
  • $x_1 = (93.0\,\mathrm{^\circ C}-87.0\,\mathrm{^\circ C})/(90\,\mathrm{s}) = \mathbf{0.067}\,\mathrm{^\circ C/s}$.

2(d)(ii)

  • Use $x_2 = (\theta_{90}-\theta_{180})/T$.
  • $x_2 = (87.0\,\mathrm{^\circ C}-83.0\,\mathrm{^\circ C})/(90\,\mathrm{s}) = \mathbf{0.044}\,\mathrm{^\circ C/s}$.

2(d)(iii)

  • Use $x_3 = (\theta_{180}-\theta_{270})/T$.
  • $x_3 = (83.0\,\mathrm{^\circ C}-81.0\,\mathrm{^\circ C})/(90\,\mathrm{s}) = \mathbf{0.022}\,\mathrm{^\circ C/s}$.

2(e)(i)

  • The cooling rate decreases with time: it falls from $0.067\,\mathrm{^\circ C/s}$ to $0.044\,\mathrm{^\circ C/s}$ and then $0.022\,\mathrm{^\circ C/s}$.

2(e)(ii)

  • After several hours the water approaches room temperature, so $\theta_F \approx \mathbf{21}\,\mathrm{^\circ C}$.

2(f)(i)

  • The cooling rates are likely to be lower when the water starts at a lower temperature.
  • The second period starts at a lower temperature than the first. Its cooling rate is also lower: $0.044\,\mathrm{^\circ C/s}$ rather than $0.067\,\mathrm{^\circ C/s}$.

2(f)(ii)

  • Keep the volume of water the same.
Original question

Log in or create account

IGCSE, A-Level & AP