Skip to content

IGCSE Physics · June 2025 · Paper 53 · Difficulty 3 · Standard

Question 2

2

In this experiment, you will investigate the cooling of hot water in a beaker.

Refer to Fig. 2.1.

(a)
(i)

Measure the room temperature $\theta_R$ shown on the thermometer.

$\theta_R$ = [1]

(ii)

Describe one technique for ensuring that this reading is accurate.

[1]

(b)

Pour $200\text{ cm}^3$ of hot water into the beaker.

Place the thermometer into the water in the beaker.

In the first row of Table 2.1, record the temperature $\theta$ of the water at time $t = 0$ and immediately start the stop-watch.

Record, in Table 2.1, the temperature $\theta$ of the water every $30\text{ s}$ until $t = 270\text{ s}$.

Table 2.1

t/s$\theta$ / °C
0
30
60
90
120
150
180
210
240
270

[1]

(c)
(i)

Calculate the average cooling rate $x_1$ during the first $90\text{ s}$ of the experiment. Use your readings from Table 2.1 and the equation:

$x_1 = \frac{\theta_0 - \theta_{90}}{T}$

where $T = 90\text{ s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90\text{ s}$.

Include the unit for the cooling rate.

$x_1$ = [1]

(ii)

Calculate the average cooling rate $x_2$ during the middle $90\text{ s}$ of the experiment. Use your readings from Table 2.1 and the equation:

$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$

where $T = 90\text{ s}$ and $\theta_{90}$ and $\theta_{180}$ are the temperatures at $t = 90\text{ s}$ and $t = 180\text{ s}$.

$x_2$ = [1]

(iii)

Calculate the average cooling rate $x_3$ during the last $90\text{ s}$ of the experiment. Use your readings from Table 2.1 and the equation:

$x_3 = \frac{\theta_{180} - \theta_{270}}{T}$

where $T = 90\text{ s}$ and $\theta_{180}$ and $\theta_{270}$ are the temperatures at $t = 180\text{ s}$ and $t = 270\text{ s}$.

$x_3$ = [1]

(d)
(i)

The temperature of the water decreases over time.

Use your results from (c) to describe the overall pattern of the rate of cooling of the water in the experiment. Justify your answer by reference to your results.

[1]

(ii)

Estimate the final temperature $\theta_F$ of the water after several hours.

$\theta_F$ = [1]

(e)
(i)

Another student does the same experiment. She starts with the hot water at a lower initial temperature.

Suggest how her cooling rates are likely to compare with yours. Use your results to explain your answer.

suggestion

explanation

[2]

(ii)

State one variable, other than initial water temperature, that the student needs to control.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • Read the room thermometer and record its value in $\mathrm{°C}$. The diagram shows the apparatus, so the actual reading depends on your room.

2(a)(ii)

  • View the thermometer scale at eye level, with your line of sight at right angles to the scale.

2(b)

  • Record the measured water temperature at each time, from $0\,\mathrm{s}$ to $270\,\mathrm{s}$. The readings should decrease as the water cools.
  • Record temperatures to at least the nearest $1\,\mathrm{°C}$, using the precision of your thermometer.

2(c)(i)

  • Use $x_1 = (\theta_0 - \theta_{90})/T$.
  • For example, if the readings are $80\,\mathrm{°C}$ and $74\,\mathrm{°C}$, then $x_1 = (80 - 74)\,\mathrm{°C}/(90\,\mathrm{s}) = \mathbf{0.067}\,\mathrm{°C/s}$. Use your own readings.

2(c)(ii)

  • Use $x_2 = (\theta_{90} - \theta_{180})/T$.
  • For example, if the readings are $74\,\mathrm{°C}$ and $69\,\mathrm{°C}$, then $x_2 = (74 - 69)\,\mathrm{°C}/(90\,\mathrm{s}) = \mathbf{0.056}\,\mathrm{°C/s}$. Use your own readings.

2(c)(iii)

  • Use $x_3 = (\theta_{180} - \theta_{270})/T$.
  • For example, if the readings are $69\,\mathrm{°C}$ and $65\,\mathrm{°C}$, then $x_3 = (69 - 65)\,\mathrm{°C}/(90\,\mathrm{s}) = \mathbf{0.044}\,\mathrm{°C/s}$. Use your own readings.

2(d)(i)

  • Compare your three rates. If $x_1 > x_2 > x_3$, the rate of cooling decreases over time; quote your three values to show this.
  • If your results show a different pattern, describe that pattern and support it with your own values.

2(d)(ii)

  • After several hours, the water will be at approximately room temperature: $\theta_F\approx\theta_R$. Use your measured room temperature in $\mathrm{°C}$.

2(e)(i)

  • Her cooling rates are likely to be lower.
  • In the first experiment, $x_2$ is lower than $x_1$: the water starts the second interval at a lower temperature and cools more slowly.

2(e)(ii)

  • Keep the volume of water the same.
Original question

Log in or create account

IGCSE, A-Level & AP