Skip to content

IGCSE Physics · June 2024 · Paper 63 · Difficulty 3 · Standard

Question 2

2

A student investigates how the volume of water affects the rate at which water in a beaker cools.

She uses the apparatus shown in Fig. 2.1.

(a)

Record the room temperature $\theta_\text{R}$ shown on the thermometer in Fig. 2.1.

$\theta_\text{R} =$ [1]

(b)

The student pours a volume of $200\text{ cm}^3$ of hot water into the beaker and records the temperature $\theta$ of the water at time $t = 0$.

She records the temperature of the water in the beaker every $30\text{ s}$.

She pours the water out and pours a volume of $75\text{ cm}^3$ of hot water into the beaker.

The student repeats the temperature measurements for this volume of water.

(i)

Describe two precautions that can be taken to ensure that temperature readings in the experiment are as accurate as possible.

1

2 [2]

(ii)

Her readings are shown in Table 2.1.

Add units to the column headings in Table 2.1.

Table 2.1

beaker
with $200\text{ cm}^3$ of hot water
beaker
with $75\text{ cm}^3$ of hot water
$t/$$\theta/$$\theta/$
087.585.5
3085.582.0
6084.078.5
9082.575.0
12081.072.0
15080.069.5
18079.067.0

[1]

(c)

Write a conclusion stating how the volume of water affects the rate of cooling of the water.

Justify your answer by reference to the results.

[2]

(d)
(i)

Using the values for $75\text{ cm}^3$ of water, calculate the average cooling rate $x_1$ for the first $90\text{ s}$ of the experiment. Use the readings from Table 2.1 and the equation

$$x_1 = \frac{\theta_0 - \theta_{90}}{T}$$

where

$T = 90\text{ s}$

and

$\theta_0$

and

$\theta_{90}$

are the temperatures at

$t = 0$

and

$t = 90\text{ s}$

.

Include the unit for the cooling rate.

$x_1 =$

Using the values for $75\text{ cm}^3$ of water, calculate the average cooling rate $x_2$ for the last $90\text{ s}$ of the experiment. Use the readings from Table 2.1 and the equation

$$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$$

where

$T = 90\text{ s}$

and

$\theta_{90}$

and

$\theta_{180}$

are the temperatures at

$t = 90\text{ s}$

and

$t = 180\text{ s}$

.

$x_2 =$ [2]

(ii)

A student states that it is important to start the two experiments in (b) with water at the same initial temperature.

Explain whether your values for $x_1$ and $x_2$ support this statement.

[1]

(e)

Another student repeats the experiment.

State two variables, other than initial water temperature, that he should control to obtain readings that are as close as possible to those in Table 2.1.

1

2 [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • The thermometer reads $\theta_R = \mathbf{18}\,\mathrm{°C}$.

2(b)(i)

  • Read the thermometer scale at eye level to avoid parallax.
  • Keep the thermometer bulb from touching the beaker, so it measures the water temperature.

2(b)(ii)

  • Time is in seconds: $t/\mathrm{s}$. Temperature is in degrees Celsius: use $\theta/\mathrm{°C}$ for both temperature columns.

2(c)

  • The smaller volume cools faster.
  • Over $180\,\mathrm{s}$, the temperature falls by $18.5\,\mathrm{°C}$ for $75\,\mathrm{cm^3}$, but only $8.5\,\mathrm{°C}$ for $200\,\mathrm{cm^3}$.

2(d)(i)

  • Use $x_1 = (\theta_0-\theta_{90})/T$ and $x_2 = (\theta_{90}-\theta_{180})/T$.
  • $x_1 = (85.5\,\mathrm{°C}-75.0\,\mathrm{°C})/90\,\mathrm{s} = \mathbf{0.12}\,\mathrm{°C/s}$.
  • $x_2 = (75.0\,\mathrm{°C}-67.0\,\mathrm{°C})/90\,\mathrm{s} = \mathbf{0.089}\,\mathrm{°C/s}$.

2(d)(ii)

  • Yes. The hotter water cooled faster: $x_1$ is greater than $x_2$. Different starting temperatures could therefore affect the comparison.

2(e)

  • Use the same volumes of water as before.
  • Use a beaker of the same size and material, so its effect on cooling stays the same.
Original question

Log in or create account

IGCSE, A-Level & AP