Skip to content

IGCSE Physics · June 2024 · Paper 63 · Difficulty 3 · Standard

Question 3

3

A student determines the focal length of a converging lens.

(a)

The student sets up the apparatus as shown in Fig. 3.1.

He sets the distance $u$ between the illuminated object and the lens to 25.0 cm.

He places the screen near the lens and moves the screen until a focused image of the illuminated object is seen on the screen.

Describe a technique for obtaining an image that is as sharp as possible.

[1]

(b)

The shapes of the illuminated object and the image seen on the screen are shown full size in Fig. 3.2 and Fig. 3.3.

(i)

Measure $h_O$, the height of the illuminated object, as shown in Fig. 3.2.

$h_O$ = cm

Measure $h_I$, the height of the image on the screen, as shown in Fig. 3.3.

$h_I$ = cm[2]

(ii)

Calculate a value $W$ using your measurements from (b)(i) and the equation $W = \frac{h_O}{h_I}$.

$W$ = [1]

(c)

The student repeats this procedure for $u$ = 20.0 cm, 30.0 cm, 40.0 cm, 50.0 cm and 60.0 cm. His results are shown in Table 3.1.

$u$/cm$h_I$/cm$W$
20.05.00.4
30.02.01.0
40.01.31.6
50.00.82.4
60.00.72.9

Plot a graph of $u$/cm ($y$-axis) against $W$ ($x$-axis). Use the results from Table 3.1. You do not need to start your axes at the origin (0,0). Draw the best-fit line.[4]

(d)
(i)

Determine the gradient $G$ of the line. Show clearly on the graph how you obtained the necessary information.

$G$ = [1]

(ii)

The focal length $f$ of the lens is numerically equal to the gradient $G$.

Record a value of $f$ for this experiment.

$f$ = cm[1]

(e)

A student decides to continue the experiment using larger values of $u$.

Explain why this produces less accurate values for $W$.

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Move the screen slowly back and forth around the sharpest position, then place it where the image is clearest.

3(b)(i)

  • Measure to the nearest millimetre: $h_O = \mathbf{2.0}\,\mathrm{cm}$ and $h_I = \mathbf{3.2}\,\mathrm{cm}$.

3(b)(ii)

  • Use $W = h_O/h_I$.
  • $W = 2.0\,\mathrm{cm}/3.2\,\mathrm{cm} = \mathbf{0.63}$.

3(c)

  • Label the horizontal axis $W$ and the vertical axis $u/\mathrm{cm}$. Choose scales so the plotted points span at least half the grid in each direction.
  • Plot $(W,u)$ as $(0.4,20.0)$, $(1.0,30.0)$, $(1.6,40.0)$, $(2.4,50.0)$ and $(2.9,60.0)$, using the labelled units. Use small crosses accurate to half a small square.
  • Draw a thin, straight line of best fit, with points spread as evenly as possible on either side.
Worked answer drawing

3(d)(i)

  • Use two widely spaced points on the best-fit line, such as $(0.4,20.5\,\mathrm{cm})$ and $(2.8,57.7\,\mathrm{cm})$. The large triangle is shown below.
  • $G=\Delta u/\Delta W=(57.7-20.5)/(2.8-0.4)=\mathbf{15.5\,\mathrm{cm}}$. A slightly different value is possible from your best-fit line.
Worked answer drawing

3(d)(ii)

  • The focal length is numerically equal to the gradient: $f = G$. For $G = 16\,\mathrm{cm}$, $f = \mathbf{16}\,\mathrm{cm}$.

3(e)

  • As $u$ increases, $h_I$ becomes small. Its measurement then has a larger percentage uncertainty, making $W$ less accurate.
Original question

Log in or create account

IGCSE, A-Level & AP