Skip to content

IGCSE Physics · June 2024 · Paper 63 · Difficulty 4 · Challenging

Question 4

4

A student investigates the relationship between the diameter of a wire and the electrical resistance of the wire.

Plan an experiment which enables her to investigate how the diameter of a wire affects the resistance of the wire.

Resistance $R$ is calculated from the equation $R = \frac{V}{I}$

where $V$ is the potential difference (p.d.) across the wire and $I$ is the current in the wire.

The apparatus available includes wires of different known diameters.

In your plan:

  • list any additional apparatus needed
  • complete Fig. 4.1 to show a circuit suitable for measuring the resistance of a wire
  • explain briefly how to do the experiment, including the measurements to take so that the resistance can be determined
  • state the key variables to keep constant
  • draw a table, or tables, with column headings, to show how to display the readings (you are not required to enter any readings in the table)
  • explain how to use the readings to reach a conclusion.

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Use an ammeter, voltmeter, switch and ruler. The completed circuit and results table are shown below.
  • Record the diameter, then measure the potential difference $V$ and current $I$. Calculate $\mathbf{R=V/I}$. Repeat for at least five wire diameters.
  • Keep the wire material and length the same. Use a small current and switch off between readings to limit heating.
  • Plot $R/\mathrm{\Omega}$ against diameter $/\mathrm{mm}$ to see how resistance changes with diameter.
Worked answer drawing
Original question

Log in or create account

IGCSE, A-Level & AP