Skip to content

IGCSE Physics · June 2024 · Paper 63 · Difficulty 3 · Standard

Question 1

1

A student determines the density of modelling clay by two methods.

Method 1

He uses the block of modelling clay shown in Fig. 1.1.

(a)
(i)

Measure the dimensions of the block of modelling clay shown in Fig. 1.1. Record the values in centimetres to the nearest millimetre.

$l =$ $\text{cm}$

$w =$ $\text{cm}$

$h =$ $\text{cm}$[1]

(ii)

Calculate the volume $V_\text{A}$ of the block. Use your measurements from (a)(i) and the equation $V_\text{A} = l \times w \times h$.

$V_\text{A} =$ $\text{cm}^3$[1]

(b)

Suggest why the value of $V_\text{A}$ is only an approximation of the volume of the block.

Describe how the accuracy of $V_\text{A}$ can be improved.

suggestion

improvement [2]

(c)

Record the mass $m_\text{A}$ of the block shown on the top-pan balance in Fig. 1.2.

$m_\text{A} =$ $\text{g}$

Calculate a value $\rho_\text{A}$ for the density of the modelling clay. Use your results from (a)(ii) and (c) and the equation $\rho_\text{A} = \frac{m_\text{A}}{V_\text{A}}$. Include the unit for the density.

$\rho_\text{A} =$ [2]

Method 2

(d)

The student then uses a smaller block of modelling clay.

Record the weight $W_\text{B}$ of the block of modelling clay shown in Fig. 1.3.

$W_\text{B} =$ $\text{N}$[1]

(e)
(i)

The student pours water into a measuring cylinder.

Record the volume $V_1$ of the water in the measuring cylinder shown in Fig. 1.4.

$V_1 =$ $\text{cm}^3$[1]

(ii)

Describe briefly how a measuring cylinder is read to obtain a value for the volume of water.[1]

(f)
(i)

The student lowers the modelling clay into the water, as shown in Fig. 1.5.

Record the new reading $V_2$ of the measuring cylinder.

$V_2 =$ $\text{cm}^3$

Calculate another value $\rho_\text{B}$ for the density of modelling clay. Use your value for $V_2$, your readings from (d) and (e)(i) and the equation $\rho_\text{B} = \frac{W_\text{B} \times k}{(V_2 - V_1)}$, where $k = 100\,\text{g/N}$.

$\rho_\text{B} =$ [1]

(ii)

Suggest which of $\rho_\text{A}$ and $\rho_\text{B}$ is likely to be the more accurate value.

Justify your answer by referring to method 1 and method 2.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Measure each dimension to the nearest millimetre: $l = \mathbf{6.2}\,\mathrm{cm}$, $w = \mathbf{3.0}\,\mathrm{cm}$ and $h = \mathbf{2.4}\,\mathrm{cm}$.

1(a)(ii)

  • Use $V_A = lwh$.
  • $V_A = (6.2\,\mathrm{cm})(3.0\,\mathrm{cm})(2.4\,\mathrm{cm}) = \mathbf{44.6}\,\mathrm{cm^3}$.

1(b)

  • The block is not perfectly regular, so its dimensions are difficult to measure exactly.
  • Measure each dimension in several places and use the averages to calculate the volume.

1(c)

  • The balance reads $m_A = \mathbf{80.4}\,\mathrm{g}$. Use $\rho_A = m_A/V_A$.
  • $\rho_A = 80.4\,\mathrm{g}/44.6\,\mathrm{cm^3} = \mathbf{1.8}\,\mathrm{g/cm^3}$.

1(d)

  • The force meter reads $F_W = \mathbf{0.35}\,\mathrm{N}$.

1(e)(i)

  • The water level gives $V_1 = \mathbf{56}\,\mathrm{cm^3}$.

1(e)(ii)

  • Read the bottom of the water meniscus at eye level, with the line of sight at right angles to the scale.

1(f)(i)

  • Read the bottom of the meniscus: $V_2 = \mathbf{74}\,\mathrm{cm^3}$. The earlier readings are $V_1 = 56\,\mathrm{cm^3}$ and $W_B = 0.35\,\mathrm{N}$.
  • Use $\rho_B = \dfrac{W_B k}{V_2 - V_1}$.
  • $\rho_B = \dfrac{(0.35\,\mathrm{N})(100\,\mathrm{g/N})}{74\,\mathrm{cm^3} - 56\,\mathrm{cm^3}} = \mathbf{1.9}\,\mathrm{g/cm^3}$.

1(f)(ii)

  • Method 2 ($\rho_B$) is likely to be more accurate because method 2 measures the volume by water displacement. Method 1 assumes the clay is a regular block.
Original question

Log in or create account

IGCSE, A-Level & AP