A student investigates how the volume of water affects the rate at which water in a beaker cools.
She uses the apparatus shown in Fig. 2.1.

Record the room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.
$\theta_R$ = [1]
Describe one precaution that can be taken to ensure that temperature readings in the experiment are as accurate as possible.
[1]
The student pours a volume of $150\text{ cm}^3$ of hot water into the beaker and records the temperature $\theta$ at time $t = 0$.
She records the temperature of the water in the beaker every $30\text{ s}$.
She tips the water out and pours a volume of $50\text{ cm}^3$ of hot water into the beaker. The student repeats the temperature measurements for this volume of water.
Her readings are shown in Table 2.1.
Complete the headings in Table 2.1.
| beaker with $150\text{ cm}^3$ of hot water | beaker with $50\text{ cm}^3$ of hot water | |
| $t/$ | $\theta/$ | $\theta/$ |
| 0 | 88.0 | 86.0 |
| 30 | 86.0 | 82.0 |
| 60 | 84.0 | 79.0 |
| 90 | 82.5 | 76.5 |
| 120 | 81.0 | 74.5 |
| 150 | 79.5 | 73.0 |
| 180 | 78.5 | 72.0 |
[1]
Write a conclusion stating how the volume of water affects the rate of cooling of the water.
Justify your answer by reference to the results.
[2]
Using the results for $50\text{ cm}^3$ of water, calculate the average cooling rate $x$ for the first $90\text{ s}$ of the experiment. Use the readings from Table 2.1 and the equation
where $T = 90\text{ s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90\text{ s}$.
Include the unit for the cooling rate.
$x$ = [2]
Another student does this experiment with the same starting temperature but in a room with a much higher room temperature than $\theta_R$ from (a)(i).
State how this affects his value of $x$ in d(i).
Explain your answer by reference to the results in Table 2.1 for the beaker with $50\text{ cm}^3$ of hot water.
statement
explanation
[2]
Some thermal energy is lost from the sides of the beaker.
The student wishes to find out how much this loss of thermal energy affects the cooling rate of $50\text{ cm}^3$ of water.
Briefly describe an additional experiment that the student can carry out to investigate this. Explain how the results can be used to determine how much this loss affects the cooling rate.
additional experiment
use of results
[2]
[Total: 11]