Skip to content

IGCSE Physics · June 2022 · Paper 63 · Difficulty 4 · Challenging

Question 3

3

Some students determine the focal length of a converging lens by different methods.

Method 1

One student uses the apparatus shown in Fig. 3.1.

(a)

The student sets the distance between the illuminated triangle and the mirror to 40 cm.

He moves the lens until he sees a sharp image of the triangle on the card, by the side of the illuminated triangle.

(i)

On Fig. 3.1, measure the distance $f_1$ between the illuminated triangle and the lens.

$f_1$ =

Fig. 3.1 is drawn to 1/5$^{th}$ scale.

Calculate the actual distance $F_1$ between the illuminated triangle and the lens in this experiment. This is a value for the focal length of the lens.

$F_1$ = [2]

(ii)

Briefly describe a technique to obtain an image on the card that is as sharp as possible in this experiment.

[1]

Method 2

Another student sets up apparatus as shown in Fig. 3.2.

(b)

The student sets the distance between the illuminated triangle and the lens to $U = 20.0$ cm.

She moves the screen until a sharp image of the triangle appears on the screen.

(i)

Measure $h_O$, the height of the illuminated triangle as shown in Fig. 3.3.

$h_O$ =

Measure $h_I$, the height of the image on the screen as shown in Fig. 3.4.

$h_I$ = [1]

Fig. 3.3
(ii)

Describe one difficulty when measuring the height of the image in this type of experiment. Suggest an improvement to overcome this difficulty.

difficulty

improvement

[2]

(iii)

Calculate a value $W$ using the equation $W = \frac{h_O}{h_I}$.

$W$ =

Calculate a second value $F_2$ for the focal length of the lens, using the equation $F_2 = \frac{U}{(W + 1)}$.

$F_2$ = [2]

(c)

A student suggests that $F_1$ and $F_2$ should be equal.

State whether the results support this suggestion.

Justify your statement with reference to the results.

statement

justification

[2]

(d)

Describe one precaution that can be taken to obtain reliable measurements of $F_1$ and $U$ in the experiment.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • Measure the diagram: $f_1=\mathbf{3.1}\,\mathrm{cm}$.
  • Use $F_1=5f_1$ for the one-fifth scale: $F_1=5(3.1\,\mathrm{cm})=\mathbf{15.5}\,\mathrm{cm}$.

3(a)(ii)

  • Move the lens slowly back and forth until the image is as sharp as possible.

3(b)(i)

  • Measure the heights on the figures: $h_O=\mathbf{1.2}\,\mathrm{cm}$ and $h_I=\mathbf{5.1}\,\mathrm{cm}$.

3(b)(ii)

  • A hand holding the ruler may block the light and hide part of the image.
  • Mark the top and bottom of the image on the screen, then measure the distance between the marks.

3(b)(iii)

  • Use $W=h_O/h_I$ and $F_2=U/(W+1)$.
  • $W=1.2\,\mathrm{cm}/5.1\,\mathrm{cm}=\mathbf{0.235}$.
  • $F_2=20.0\,\mathrm{cm}/(0.235+1)=\mathbf{16.2}\,\mathrm{cm}$.

3(c)

  • Yes. The values $15.5\,\mathrm{cm}$ and $16.2\,\mathrm{cm}$ are close enough to be equal within experimental accuracy.

3(d)

  • Mark the centre of the lens on its holder so the distance is measured from the correct position.
Original question

Log in or create account

IGCSE, A-Level & AP