Skip to content

IGCSE Physics · June 2022 · Paper 63 · Difficulty 3 · Standard

Question 1

1

A student investigates the forces supporting a metre rule.

He uses the apparatus shown in Fig. 1.1. The scale of the metre rule faces upwards.

(a)

The student ensures that the metre rule is horizontal.

Briefly describe how to check that the rule is horizontal. You may draw a diagram if it helps to explain your answer.[1]

(b)
(i)

The student sets the distance $d$ between the $0.0\text{ cm}$ mark and the $1.00\text{ N}$ load as shown in Fig. 1.1. He moves the thread supporting the $1.00\text{ N}$ load so that it is at the mark on the metre rule shown in Fig. 1.2.

Record the distance $d$ indicated on Fig. 1.2.

$d =$ $\text{cm}$[1]

(ii)

The readings on newton meter P and newton meter Q are shown in Fig. 1.3.

Record $F_{\text{P}}$, the reading on newton meter P shown in Fig. 1.3.

Record $F_{\text{Q}}$, the reading on newton meter Q shown in Fig. 1.3.

$F_{\text{P}} =$

$F_{\text{Q}} =$ [1]

(c)

The student moves the $1.00\text{ N}$ load to distances $d = 25.0\text{ cm}$, $d = 35.0\text{ cm}$, $d = 45.0\text{ cm}$, $d = 55.0\text{ cm}$ and $d = 65.0\text{ cm}$.

He reads the value $F_{\text{P}}$ on newton meter P and the value $F_{\text{Q}}$ on newton meter Q. His readings are shown in Table 1.1.

Table 1.1

$d\text{/cm}$$F_{\text{P}}\text{ /N}$$F_{\text{Q}}\text{ /N}$
25.01.811.19
35.01.701.30
45.01.561.45
55.01.441.55
65.01.311.69

Using the values from Table 1.1, plot a graph of $F_{\text{P}}\text{/N}$ ($y$-axis) against $d\text{/cm}$ ($x$-axis).

On the same axes, and using the same scales, plot a graph of $F_{\text{Q}}\text{ /N}$ ($y$-axis) against $d\text{/cm}$ ($x$-axis).

Draw two best-fit lines, one for each set of plots. Show clearly on your graph which line is for $F_{\text{P}}$ and which line is for $F_{\text{Q}}$.

[5]

(d)

From your graph, determine $F_0$, the value of $F_{\text{P}}$ where the two best-fit lines cross.

$F_0 =$

Calculate the weight $W_{\text{R}}$ of the metre rule, using the equation $W_{\text{R}} = (2 \times F_0) - k$, where $k = 1.00\text{ N}$.

$W_{\text{R}} =$ [2]

(e)

Another student does the experiment with the same equipment. He reads values of $F_{\text{P}}$ which are the same as those in Table 1.1 but his values of $F_{\text{Q}}$ are all $0.10\text{ N}$ greater than those in Table 1.1.

Suggest a reason for this difference. Assume that the values in Table 1.1 are correct.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Measure the distance from the rule to the level bench at two points. The rule is horizontal if these distances are equal.

1(b)(i)

  • Read the scale at the thread: $d=\mathbf{15.2}\,\mathrm{cm}$.

1(b)(ii)

  • Read the two meters: $F_P=\mathbf{1.05}\,\mathrm{N}$ and $F_Q=\mathbf{1.95}\,\mathrm{N}$.

1(c)

  • Label the horizontal axis $d/\mathrm{cm}$ and the vertical axis $F/\mathrm{N}$. Choose even scales that spread the points across the grid.
  • Plot $F_P$: $(25.0,1.81)$, $(35.0,1.70)$, $(45.0,1.56)$, $(55.0,1.44)$ and $(65.0,1.31)$.
  • Plot $F_Q$: $(25.0,1.19)$, $(35.0,1.30)$, $(45.0,1.45)$, $(55.0,1.55)$ and $(65.0,1.69)$.
  • Draw and label a thin best-fit line for each set. The lines should cross near $d=50.0\,\mathrm{cm}$.

1(d)

  • Read the force where the lines cross: $F_0\approx\mathbf{1.50}\,\mathrm{N}$.
  • Use $W_R=2F_0-k$: $W_R=2(1.50\,\mathrm{N})-1.00\,\mathrm{N}=\mathbf{2.00}\,\mathrm{N}$. Use your own graph reading.

1(e)

  • Meter Q may have a zero error: it may not have been set to zero before the experiment.
Original question

Log in or create account

IGCSE, A-Level & AP