In this experiment, you will investigate how the volume of water in a beaker affects the rate at which the water cools.
Carry out the following instructions, referring to Fig. 2.1.

During this experiment, the thermometer must remain clamped securely to the stand.
Pour $150\text{ cm}^3$ of hot water into the beaker. Place the thermometer in the water. Wait until the reading on the thermometer stops rising.
In the first row of Table 2.1, record the temperature $\theta$ of the water at $t = 0$ and immediately start the stop-clock. Record the temperature $\theta$ of the water at times $t = 30\text{ s}$, $t = 60\text{ s}$, $t = 90\text{ s}$, $t = 120\text{ s}$, $t = 150\text{ s}$ and $t = 180\text{ s}$.
Remove the thermometer from the beaker and tip out the water.[1]
Repeat (a) using $50\text{ cm}^3$ of hot water.[2]
Complete the headings in Table 2.1.
Table 2.1
| beaker with $150\text{ cm}^3$ of hot water | beaker with $50\text{ cm}^3$ of hot water | |
| $t/$ | $\theta/$ | $\theta/$ |
| 0 | ||
| 30 | ||
| 60 | ||
| 90 | ||
| 120 | ||
| 150 | ||
| 180 |
[1]
Write a conclusion stating how the volume of water affects the rate of cooling of the water. Justify your answer by reference to your results.[2]
Using your results for $50\text{ cm}^3$ of water, calculate the average cooling rate $x$ for the first $90\text{ s}$ of the experiment. Use your readings from Table 2.1 and the equation
where $T = 90\text{ s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90\text{ s}$. Include the unit for the cooling rate.
$x =$ [1]
A student does this experiment in a room with a much higher room temperature than your room.
State how this affects her value of $x$ in (d)(i). Explain your answer by reference to your results from the beaker with $50\text{ cm}^3$ of hot water.
statement
explanation
[2]
Some thermal energy is lost from the sides of the beaker.
Another student wishes to find out how much this loss of thermal energy affects the cooling rate of $50\text{ cm}^3$ of water.
Briefly describe an additional experiment that the student can carry out to investigate this. Explain how the results can be used to determine how much this loss affects the cooling rate.
You are not required to carry out the experiment.
additional experiment
use of results
[2]
[Total: 11]