Skip to content

IGCSE Physics · June 2022 · Paper 53 · Difficulty 4 · Challenging

Question 3

3

In this experiment, you will determine the focal length of a converging lens by different methods.

Method 1

Carry out the following instructions, referring to Fig. 3.1.

(a)

Arrange the illuminated object, lens and mirror as shown in Fig. 3.1.

(i)

Set the distance $D$ between the mirror and the illuminated object to 40 cm.

Move the lens until a sharp image appears on the front of the card, by the side of the illuminated object.

Measure the distance $f_1$ between the lens and the illuminated object. This is a value for the focal length of the lens.

$f_1$ = [1]

(ii)

Briefly describe a technique to obtain an image on the card that is as sharp as possible in this experiment.

[1]

Method 2

Carry out the following instructions, referring to Fig. 3.2.

(b)

Set up the lens, illuminated object and screen as shown in Fig. 3.2.

Set the distance between the illuminated object and the lens to $u$ = 20.0 cm.

Move the screen until a sharp image of the illuminated object appears on the screen.

(i)

Measure $h_O$, the height of the illuminated triangle, as indicated in Fig. 3.2.

$h_O$ =

Measure $h_I$, the height of the image of the triangle on the screen.

$h_I$ = [2]

(ii)

Calculate a value $W$ using the equation $W = \frac{h_O}{h_I}$.

$W$ =

Calculate a second value $f_2$ for the focal length of the lens, using the equation

$f_2 = \frac{u}{(W + 1)}$.

$f_2$ = [2]

(iii)

Describe one difficulty that can be experienced when measuring the height of the image. Suggest an improvement to overcome this difficulty.

difficulty

improvement

[2]

(c)

A student suggests that $f_1$ and $f_2$ should be equal.

State whether your results support this suggestion.

Justify your statement by reference to your results.

statement

justification

[2]

(d)

Describe one precaution you took to obtain reliable measurements of $f_1$ and $u$ in this experiment.

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • With $D = 40\,\mathrm{cm}$, move the lens until the image beside the object is sharp. Measure from the centre of the lens to the object to find $f_1$.
  • An example reading is $f_1 = \mathbf{15.0}\,\mathrm{cm}$. Use your own measured distance; Fig. 3.1 is a setup diagram, not a scale drawing.

3(a)(ii)

  • Move the lens slowly back and forth until the image is as sharp as possible.

3(b)(i)

  • With $u = 20.0\,\mathrm{cm}$, move the screen until the image is sharp. Measure the real object and image, not Fig. 3.2.
  • Measure the vertical height of the illuminated triangle with a ruler. An example reading is $h_O = \mathbf{1.5}\,\mathrm{cm}$.
  • Measure the vertical height of its image on the screen. An example reading is $h_I = \mathbf{4.5}\,\mathrm{cm}$. Use your own measured heights.

3(b)(ii)

  • Use $W = h_O/h_I$, then $f_2 = u/(W + 1)$.
  • For example, if $h_O = 1.5\,\mathrm{cm}$ and $h_I = 4.5\,\mathrm{cm}$, $W = (1.5\,\mathrm{cm})/(4.5\,\mathrm{cm}) = \mathbf{0.333}$.
  • Then $f_2 = (20.0\,\mathrm{cm})/(0.333 + 1) = \mathbf{15.0}\,\mathrm{cm}$. Use your own measured heights.

3(b)(iii)

  • Your hand may block the light while you measure the image.
  • Use a translucent screen and measure the image from behind it.

3(c)

  • Quote your values of $f_1$ and $f_2$. If they are close enough to agree within experimental uncertainty, the results support the suggestion.
  • If the difference is too large to be explained by measurement uncertainty, the results do not support it.

3(d)

  • View the ruler at right angles to its scale to reduce parallax error.
Original question

Log in or create account

IGCSE, A-Level & AP