Skip to content

IGCSE Physics · June 2022 · Paper 51 · Difficulty 2 · Core

Question 2

2

In this experiment, you will investigate the cooling of water.

Carry out the following instructions, referring to Fig. 2.1. You are provided with an insulating sleeve to place around the metal can while pouring hot water.

(a)

Use the thermometer to measure the room temperature $\theta_R$.

$\theta_R$ = [1]

(b)
(i)

Place the insulating sleeve around the can.

Pour hot water into the can until the water level is up to approximately 2 cm from the top. Place the thermometer in the water.

Remove the insulating sleeve.

Record, in Table 2.1, the temperature $\theta$ of the hot water at time $t = 0$. Immediately start the stop-clock.

Measure, and record in Table 2.1, the water temperature every 30 s until you have 7 sets of readings.

Do not empty the can at this stage.[2]

(ii)

Complete the column headings in Table 2.1.

Table 2.1

$t$/$\theta$/
0
30
60
90
120
150
180

[1]

(c)
(i)

Calculate the decrease in temperature $\Delta\theta_1$ of the hot water between times $t = 0$ and $t = 60\text{ s}$.

$\Delta\theta_1$ =

Calculate the average rate of cooling $R_1$ of the water using the equation

$R_1 = \frac{\Delta\theta_1}{\Delta t}$

where $\Delta t = 60\text{ s}$. Include the unit.

$R_1$ = [1]

(ii)

Calculate the decrease in temperature $\Delta\theta_2$ of the hot water between times $t = 120\text{ s}$ and $t = 180\text{ s}$.

$\Delta\theta_2$ =

Calculate the average rate of cooling $R_2$ of the water using the equation

$R_2 = \frac{\Delta\theta_2}{\Delta t}$

where $\Delta t = 60\text{ s}$. Include the unit.

$R_2$ = [1]

(d)

A student states that most of the thermal energy lost by the water in the can is by evaporation from the water surface.

Another student states that most of the thermal energy lost by the water in the can is by conduction through the sides of the can.

The students repeat the experiment twice to investigate the two statements.

Suggest one suitable addition to the apparatus for each additional experiment.

  1. [2]
(e)
(i)

Place the insulating sleeve around the can.

Pour the water from the can into the measuring cylinder.

Measure and record the volume $V$ of water.

$V$ = $\text{cm}^3$[1]

(ii)

State two precautions taken when reading the volume of water in the measuring cylinder in order to obtain an accurate result.

  1. [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Read the thermometer in the room and include the unit. For example, a room-temperature reading could be $\theta_R = \mathbf{20}\,^\circ\mathrm{C}$; use your measured value.

2(b)(i)

  • Record the temperature at $t = 0\,\mathrm{s}$ and then every $30\,\mathrm{s}$ up to $180\,\mathrm{s}$. The readings should decrease as the water cools.
  • Record all seven temperatures to the nearest $1\,^\circ\mathrm{C}$ or more precisely, using the same precision throughout.

2(b)(ii)

  • Label the columns $t\,/\,\mathrm{s}$ and $\theta\,/\,\mathrm{°C}$.

2(c)(i)

  • Use $\Delta\theta_1 = \theta_{0} - \theta_{60}$. For example, if the readings are $80\,^\circ\mathrm{C}$ and $76\,^\circ\mathrm{C}$, then $\Delta\theta_1 = \mathbf{4}\,^\circ\mathrm{C}$.
  • Use $R_1 = \Delta\theta_1/\Delta t$. For this example, $R_1 = 4\,^\circ\mathrm{C}/60\,\mathrm{s} = \mathbf{0.067}\,^\circ\mathrm{C/s}$. Use your own readings.

2(c)(ii)

  • Use $\Delta\theta_2 = \theta_{120} - \theta_{180}$. For example, if the readings are $72\,^\circ\mathrm{C}$ and $69\,^\circ\mathrm{C}$, then $\Delta\theta_2 = \mathbf{3}\,^\circ\mathrm{C}$.
  • Use $R_2 = \Delta\theta_2/\Delta t$. For this example, $R_2 = 3\,^\circ\mathrm{C}/60\,\mathrm{s} = \mathbf{0.050}\,^\circ\mathrm{C/s}$. Use your own readings.

2(d)

  • Add a lid in one experiment to reduce evaporation from the surface.
  • Add insulation around the can in the other experiment to reduce energy transfer through its sides.

2(e)(i)

  • Read the volume in the measuring cylinder. For example, a reading could be $V = \mathbf{200}\,\mathrm{cm^3}$; record your own measured value.

2(e)(ii)

  • View the scale at eye level, at right angles to it, to avoid parallax error.
  • Read the volume at the bottom of the meniscus.
Original question

Log in or create account

IGCSE, A-Level & AP