Skip to content

IGCSE Physics · March 2023 · Paper 62 · Difficulty 3 · Standard

Question 2

2

A student investigates the cooling of hot water from different initial temperatures.

She uses the apparatus shown in Fig. 2.1.

(a)
(i)

The student measures the room temperature.

Record room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.

$\theta_R$ = °C[1]

(ii)

Describe one precaution that the student takes to ensure that this temperature reading is as accurate as possible.

[1]

(b)

Experiment A

The student pours a volume of 100 cm$^{3}$ of hot water into the beaker and records the temperature $\theta_A$ at time $t = 0$ s.

She records the temperature of the water in the beaker every 30 s.

Her readings for Experiment A are shown in Table 2.1.

Experiment B

The student repeats the process. She waits until the initial temperature $\theta_B$ of the water is the same value as the temperature $\theta_A$ at 90 s in Experiment A.

In the first line of Table 2.1, record her initial temperature $\theta_B$ for Experiment B.[1]

Her readings for the remainder of Experiment B are shown in Table 2.1.

Table 2.1

t/ s$\theta_A$/ °C$\theta_B$/ °C
092.0
3089.583.5
6087.081.5
9085.079.5
12083.578.0
15082.076.5
18080.075.0
(c)

Write a conclusion stating how the temperature at $t = 0$ s affects the rate of cooling of the water.

Justify your answer by reference to values from the results.

[2]

(d)
(i)

Calculate the average cooling rate $x_1$ during the second half of Experiment A.

Use the readings from Table 2.1 and the equation

$$x_1 = \frac{\theta_{A90} - \theta_{A180}}{T}$$

where $T = 90$ s and $\theta_{A90}$ and $\theta_{A180}$ are the temperatures at $t = 90$ s and $t = 180$ s in Experiment A.

Include the unit for the cooling rate.

$x_1$ = [1]

(ii)

Calculate the average cooling rate $x_2$ during the first half of Experiment B.

Use the readings from Table 2.1 and the equation

$$x_2 = \frac{\theta_{B0} - \theta_{B90}}{T}$$

where $T = 90$ s and $\theta_{B0}$ and $\theta_{B90}$ are the temperatures at $t = 0$ s and $t = 90$ s in Experiment B.

$x_2$ = [1]

(iii)

A student suggests that $x_1$ and $x_2$ should be the same.

State whether your results support this suggestion.

Justify your statement by reference to your results.

statement

justification

[2]

(e)

State two variables which must be controlled so that the comparison of $x_1$ and $x_2$ is valid.

1

2

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • The thermometer reads $\theta_R = \mathbf{21}\,{}^{\circ}\mathrm{C}$.

2(a)(ii)

  • Read the scale at eye level, at right angles to it, to avoid parallax error.

2(b)

  • At $90\,\mathrm{s}$ in experiment A, the temperature is $85.0\,{}^{\circ}\mathrm{C}$. Enter $\mathbf{85.0}\,{}^{\circ}\mathrm{C}$ as the initial temperature for B.

2(c)

  • The higher initial temperature gives a faster average cooling rate. Compare the temperature falls over the same time, $180\,\mathrm{s}$.
  • Use $\Delta\theta=\theta_0-\theta_{180}$. For A: $\Delta\theta=92.0\,{}^{\circ}\mathrm{C}-80.0\,{}^{\circ}\mathrm{C}=\mathbf{12.0}\,{}^{\circ}\mathrm{C}$.
  • For B: $\Delta\theta=85.0\,{}^{\circ}\mathrm{C}-75.0\,{}^{\circ}\mathrm{C}=\mathbf{10.0}\,{}^{\circ}\mathrm{C}$. A cools more in the same time.

2(d)(i)

  • Use $x_1 = (\theta_{A90}-\theta_{A180})/T$.
  • $x_1 = (85.0\,{}^{\circ}\mathrm{C} - 80.0\,{}^{\circ}\mathrm{C})/(90\,\mathrm{s}) = \mathbf{0.056}\,{}^{\circ}\mathrm{C/s}$.

2(d)(ii)

  • Use $x_2 = (\theta_{B0}-\theta_{B90})/T$.
  • $x_2 = (85.0\,{}^{\circ}\mathrm{C} - 79.5\,{}^{\circ}\mathrm{C})/(90\,\mathrm{s}) = \mathbf{0.061}\,{}^{\circ}\mathrm{C/s}$.

2(d)(iii)

  • The results support the suggestion within experimental accuracy.
  • The rates, $0.056\,{}^{\circ}\mathrm{C/s}$ and $0.061\,{}^{\circ}\mathrm{C/s}$, differ by about $10\%$, which could be due to measurement uncertainty.

2(e)

  • Keep the volume of water the same.
  • Keep the room temperature the same.
Original question

Log in or create account

IGCSE, A-Level & AP