Skip to content

IGCSE Physics · March 2023 · Paper 62 · Difficulty 3 · Standard

Question 3

3

A student investigates the properties of a resistance wire.

He uses the circuit shown in Fig. 3.1.

Fig. 3.1
(a)

On Fig. 3.1, draw a voltmeter connected to measure the potential difference (p.d.) across length $l$ of the resistance wire.[1]

(b)
(i)

The student connects the crocodile clip to a length $l = 20.0\text{ cm}$ of the resistance wire. He measures the value of potential difference $V$ and current $I$ for the resistance wire.

Read, and record in the first line of Table 3.1, the values of $V$ and $I$ shown on the meters in Fig. 3.2 and Fig. 3.3.

The student repeats the process for lengths $l = 40.0\text{ cm}$, $l = 60.0\text{ cm}$, $l = 80.0\text{ cm}$ and $l = 100.0\text{ cm}$ of the resistance wire in turn. His results are shown in Table 3.1.

Table 3.1

$l/\text{cm}$$V/\text{V}$$I/\text{A}$$R/\Omega$
$20.0$
$40.0$$1.7$$0.47$$3.6$
$60.0$$2.2$$0.52$$4.2$
$80.0$$2.3$$0.35$$6.6$
$100.0$$2.4$$0.29$$8.3$

[2]

(ii)

For length $l = 20.0\text{ cm}$, calculate and record in Table 3.1 the resistance $R$ of the resistance wire. Use your values of $V$ and $I$ from (b)(i) and the equation

$$R = \frac{V}{I}.$$

[1]

(c)

Plot a graph of $R/\Omega$ ($y$-axis) against $l/\text{cm}$ ($x$-axis). Draw the straight line of best fit.

[4]

(d)
(i)

Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.

$G =$ [1]

(ii)

The gradient $G$ is numerically equal to the resistance per unit length $R_0$ of the resistance wire. Write down a value of $R_0$ for this experiment.

$R_0 =$ $\Omega/\text{cm}$[1]

(e)

Suggest one practical reason why students carrying out this experiment may not obtain the same readings as in Table 3.1. Assume that the procedure has been done carefully.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Draw the voltmeter symbol as a circle containing $V$, connected in parallel across the length $l$ of wire.

3(b)(i)

  • Read the voltmeter and ammeter scales: $V = \mathbf{1.3}\,\mathrm{V}$ and $I = \mathbf{0.86}\,\mathrm{A}$.

3(b)(ii)

  • Use $R = V/I$.
  • $R = (1.3\,\mathrm{V})/(0.86\,\mathrm{A}) = \mathbf{1.5}\,\Omega$.

3(c)

  • Label the horizontal axis $l/\mathrm{cm}$ and the vertical axis $R/\Omega$. Choose scales that use at least half the grid.
  • Plot $(20.0,1.5)$, $(40.0,3.6)$, $(60.0,4.2)$, $(80.0,6.6)$ and $(100.0,8.3)$, then draw a thin straight line of best fit.

3(d)(i)

  • Draw a large triangle on the best-fit line. Use $G=\Delta R/\Delta l$.
  • For example, read points near $(20\,\mathrm{cm},1.5\,\Omega)$ and $(100\,\mathrm{cm},8.2\,\Omega)$ on the line.
  • $G=(8.2\,\Omega-1.5\,\Omega)/(100\,\mathrm{cm}-20\,\mathrm{cm})\approx\mathbf{0.084}\,\Omega/\mathrm{cm}$.

3(d)(ii)

  • The resistance per unit length equals the gradient: $R_0 \approx \mathbf{0.084}\,\Omega/\mathrm{cm}$.

3(e)

  • The resistance wire may not be uniform, so a different piece can give different readings.
Original question

Log in or create account

IGCSE, A-Level & AP