A student investigates the thermal insulation properties of air. He places a thermometer in a clamp, as shown in Fig. 2.1.

Record room temperature $\theta_\text{R}$ shown on the thermometer in Fig. 2.1.
$\theta_\text{R} =$ [1]
The student uses the apparatus shown in Fig. 2.1, Fig. 2.2 and Fig. 2.3 to investigate the thermal properties of air.

Beakers A and B are made of glass.
Beaker A is placed inside beaker B for the second part of the experiment, as shown in Fig. 2.3. The lid fits tightly in beaker B.
The student removes the lid from beaker A. He pours $150\text{ cm}^3$ of hot water into beaker A and replaces the lid. He inserts the thermometer into the hot water and records the temperature $\theta$ at time $t = 0$ and then every $30\text{ s}$.
Describe two precautions that can be taken to ensure that the temperature reading is as accurate as possible.
- [2]
The student pours away the water from beaker A. He then places beaker A inside beaker B so that there is an air gap between the two beakers, as shown in Fig. 2.3.
He repeats the process described in (b)(i). His readings are shown in Table 2.1.
Add units to the column headings in Table 2.1.
Table 2.1
| beaker A | beaker A inside beaker B | |
| $t /$ | $\theta /$ | $\theta /$ |
| 0 | 85.0 | 85.5 |
| 30 | 79.5 | 83.5 |
| 60 | 75.0 | 82.0 |
| 90 | 72.0 | 81.0 |
| 120 | 70.0 | 80.0 |
| 150 | 68.5 | 79.5 |
| 180 | 67.5 | 79.0 |
[1]
Write a conclusion stating whether the air gap affects the rate of cooling of the water.
Justify your answer by reference to values from Table 2.1.[2]
A student suggests that glass is a thermal insulator and the experiment does not just test the effect of the air gap.
Suggest one change to the apparatus that would test the air gap more effectively.[1]
Another student repeats this experiment using the same apparatus shown in Fig. 2.1, Fig. 2.2 and Fig. 2.3.
State two variables that she should control in order to obtain readings as close as possible to the readings in Table 2.1.
[2]
Calculate the average cooling rate $R$ for beaker A cooling on its own. Use the readings for beaker A in Table 2.1 and the equation
where
$T = 180\text{ s}$and
$\theta_0$and
$\theta_{180}$are the temperatures of the water in beaker A at
$t = 0$and
$t = 180\text{ s}$.
Include the unit for the cooling rate.
$R =$ [2]
[Total: 11]