Skip to content

IGCSE Physics · March 2021 · Paper 62 · Difficulty 3 · Standard

Question 2

2

Students investigate the cooling of hot water in two different cups.

They use the apparatus shown in Fig. 2.1.

Cup A is made from thin plastic. The top of cup A has an inside diameter of 7 cm. Cup B is made from expanded polystyrene. The top of cup B has an inside diameter of 8 cm.

(a)
(i)

Record the room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.

$\theta_R$ = [1]

(ii)

Describe one precaution that you would take to ensure that temperature readings in the experiment are as accurate as possible.[1]

(b)

A volume of 100 cm$^{3}$ of hot water is poured into each cup and the initial temperature $\theta$ is recorded in Table 2.1.

The temperature of the water in each cup is recorded every 30 s. The values are shown in Table 2.1.

Table 2.1

cup Acup B
$t$/$\theta$/$\theta$/
087.588.0
3084.586.0
6082.084.5
9080.583.0
12079.082.0
15078.081.0
18077.080.5

Complete the headings in Table 2.1.[1]

(c)

Write a conclusion stating which cup, A or B, is the more effective in reducing the cooling rate of the hot water in this experiment.

Justify your answer by reference to the results.[2]

(d)
(i)

Calculate $x_A$, the average cooling rate for cup A over the whole experiment. Use the readings for cup A from Table 2.1 and the equation

$x_A = \frac{\theta_0 - \theta_{180}}{T}$

where $T = 180\text{ s}$ and $\theta_0$ and $\theta_{180}$ are the temperatures at time $t = 0$ and at time $t = 180\text{ s}$.

Include the unit for the cooling rate.

$x_A$ = [2]

(ii)

Suggest an additional experiment to show how the lid affects the cooling rate of cup A.

Explain how to use the additional results to show the effect.

additional experiment

explanation [2]

(e)

A student wishes to compare the effect of the materials of the cups on cooling rates. Suggest two variables that she should control to make this test fair.[2]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • Read the thermometer at eye level: $\theta_R = \mathbf{23}\,{}^\circ\mathrm{C}$.

2(a)(ii)

  • Read the thermometer at eye level to avoid parallax error.

2(b)

  • The headings are $t/\mathbf{s}$, $\theta/{}^\circ\mathbf{C}$ and $\theta/{}^\circ\mathbf{C}$: time in seconds and both temperatures in degrees Celsius.

2(c)

  • Cup $\textbf{B}$ reduces the cooling rate more effectively.
  • Over 180 s, the temperature falls by $10.5\,{}^\circ\mathrm{C}$ in A but only $7.5\,{}^\circ\mathrm{C}$ in B.

2(d)(i)

  • Use $x_A = (\theta_0 - \theta_{180})/T$.
  • $x_A = (87.5\,{}^\circ\mathrm{C} - 77.0\,{}^\circ\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.058}\,{}^\circ\mathrm{C/s}$.

2(d)(ii)

  • Repeat the experiment with cup A without its lid, keeping the other conditions the same.
  • Calculate the new cooling rate and subtract $x_A$ to find the effect of removing the lid.

2(e)

  • Keep the volume of water the same in both cups.
  • Keep the initial water temperature the same, so differences in cooling are linked to the cup material.
Original question

Log in or create account

IGCSE, A-Level & AP