Skip to content

IGCSE Physics · March 2021 · Paper 62 · Difficulty 3 · Standard

Question 3

3

A student investigates a resistor and a lamp connected in series. She uses the circuit shown in Fig. 3.1.

(a)

The student moves the crocodile clip on the resistance wire so that the value of the potential difference $V_{\text{L}}$ across the lamp is $2.0\text{ V}$.

She measures the current $I$ for the lamp and resistor in series.

She then connects the voltmeter to measure the potential difference $V_{\text{R}}$ across the resistor.

Read, and record in Table 3.1, the values of $I$ and $V_{\text{R}}$ shown on the meters in Fig. 3.2 and Fig. 3.3.[2]

(b)

The student repeats the steps in (a) for values of $V_{\text{L}} = 1.0\text{ V}$ and $V_{\text{L}} = 0.5\text{ V}$. Her readings are shown in Table 3.1.

Table 3.1

$V_{\text{L}}/\text{V}$$I/\text{A}$$V_{\text{R}}/\text{V}$$R_{\text{L}}/\Omega$$R_{\text{R}}/\Omega$
2.0
1.00.153.0
0.50.122.4

Calculate, and record in Table 3.1, the resistance of the lamp $R_{\text{L}}$ for each value of $V_{\text{L}}$.

Use the values of $V_{\text{L}}$ and $I$ from Table 3.1 and the equation $R_{\text{L}} = \frac{V_{\text{L}}}{I}$.

Calculate, and record in Table 3.1, the resistance of the resistor $R_{\text{R}}$ for each value of $V_{\text{L}}$.

Use the values of $V_{\text{R}}$ and $I$ from Table 3.1 and the equation $R_{\text{R}} = \frac{V_{\text{R}}}{I}$.[2]

(c)
(i)

Describe the pattern of any change in the value of $R_{\text{L}}$ as $V_{\text{L}}$ decreases.[1]

(ii)

A student suggests that $R_{\text{R}}$ should be constant.

State whether your results support this suggestion.

Justify your statement by reference to values from Table 3.1.

statement

justification [2]

(d)

A student wishes to determine the resistance of the lamp $R_{\text{L}}$ when the potential difference across the lamp $V_{\text{L}} = 0.0\text{ V}$.

Describe how the experiment can be extended to do this with the help of a suitable graph.[2]

(e)

It is possible to use a variable resistor instead of a resistance wire to change the potential difference across the lamp.

Complete the circuit in Fig. 3.4 to show:

  • a variable resistor used for this purpose
    • the voltmeter connected to measure the potential difference across the resistor
Fig. 3.4

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Read the scales at the pointers: $I = \mathbf{0.18}\,\mathrm{A}$ and $V_R = \mathbf{3.7}\,\mathrm{V}$.

3(b)

  • Use $R_L = V_L/I$ and $R_R = V_R/I$ for each row.
  • At $2.0\,\mathrm{V}$, $R_L = (2.0\,\mathrm{V})/(0.18\,\mathrm{A}) = \mathbf{11}\,\mathrm{\Omega}$ and $R_R = (3.7\,\mathrm{V})/(0.18\,\mathrm{A}) = \mathbf{21}\,\mathrm{\Omega}$.
  • At $1.0\,\mathrm{V}$, $R_L = (1.0\,\mathrm{V})/(0.15\,\mathrm{A}) = \mathbf{6.7}\,\mathrm{\Omega}$ and $R_R = (3.0\,\mathrm{V})/(0.15\,\mathrm{A}) = \mathbf{20}\,\mathrm{\Omega}$.
  • At $0.5\,\mathrm{V}$, $R_L = (0.5\,\mathrm{V})/(0.12\,\mathrm{A}) = \mathbf{4.2}\,\mathrm{\Omega}$ and $R_R = (2.4\,\mathrm{V})/(0.12\,\mathrm{A}) = \mathbf{20}\,\mathrm{\Omega}$.

3(c)(i)

  • $R_L$ $\textbf{decreases}$ as $V_L$ decreases.

3(c)(ii)

  • $\textbf{Yes}$, the results support the suggestion within experimental accuracy.
  • $R_R$ is about $21\,\mathrm{\Omega}$, $20\,\mathrm{\Omega}$ and $20\,\mathrm{\Omega}$, which are close to one another.

3(d)

  • Take more readings at different lamp voltages, calculate $R_L$ for each, and plot $R_L$ against $V_L$.
  • Extend the line to the $R_L$ axis. The intercept gives $R_L$ at $V_L = 0\,\mathrm{V}$.

3(e)

  • Put a variable resistor in series with the lamp and ammeter. Its symbol is a rectangle with a diagonal arrow through it.
  • Connect the voltmeter in parallel across the fixed resistor.
Original question

Log in or create account

IGCSE, A-Level & AP