Skip to content

IGCSE Physics · March 2021 · Paper 62 · Difficulty 3 · Standard

Question 1

1

A student investigates the motion of an oscillating metre rule.

He uses the apparatus shown in Fig. 1.1.

(a)

The student ensures that the metre rule is horizontal.

Briefly describe how to check that the metre rule is horizontal. You may draw a diagram or draw on Fig. 1.1 if it helps to explain your answer.[1]

(b)

The student moves the stands so that the vertical threads are at the marks on the metre rule shown in Fig. 1.2.

Calculate the distance $d$ between the threads.

$d =$ cm[1]

(c)

He twists the metre rule a small amount, as shown in Fig. 1.3, and then lets it go so that it oscillates in a rotating motion.

He measures the time $t$ for 5 complete oscillations of the metre rule.

$t =$ 3.63s

Suggest why it is useful to take a trial reading for this experiment.[1]

(d)

The student carries out the same procedure for $d$ values of $20.0\text{ cm}$, $30.0\text{ cm}$, $40.0\text{ cm}$, $50.0\text{ cm}$ and $60.0\text{ cm}$. His readings are shown in Table 1.1.

Table 1.1

$d/\text{cm}$$t/\text{ s}$$\frac{1}{T}/\frac{1}{\text{s}}$
20.017.85
30.011.360.44
40.08.770.57
50.06.930.72
60.05.680.88

For distance $d = 20.0\text{ cm}$, calculate and record in Table 1.1, the value of $\frac{1}{T}$ where $T$ is the time for 1 oscillation of the metre rule.

Use the value of time $t$ from Table 1.1 and the equation $\frac{1}{T} = \frac{5}{t}$.[1]

(e)

Plot a graph of distance $d/\text{cm}$ ($y$-axis) against $\frac{1}{T}/\frac{1}{\text{s}}$ ($x$-axis).

[4]

(f)

Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.

$G =$ [1]

(g)
(i)

Explain why it is more accurate to measure the time for 5 oscillations rather than for 1 oscillation.[1]

(ii)

Describe how the experiment could be improved to make the readings more reliable.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Measure the distance from the rule to the bench at two places. The rule is horizontal if the distances are equal.

1(b)

  • Use $d = x_2-x_1$ for the separation of the threads.
  • $d = 98.0\,\mathrm{cm}-2.0\,\mathrm{cm} = \mathbf{96.0}\,\mathrm{cm}$.

1(c)

  • A trial checks whether the oscillations are slow enough to time and helps choose a useful range of $d$.

1(d)

  • Use $1/T = 5/t$ for five oscillations.
  • $1/T = 5/(17.85\,\mathrm{s}) = \mathbf{0.28}\,\mathrm{1/s}$.

1(e)

  • Label the horizontal axis $1/T\,/\,\mathrm{1/s}$ and the vertical axis $d\,/\,\mathrm{cm}$. Choose scales that use at least half the grid.
  • Plot $(0.28,20.0)$, $(0.44,30.0)$, $(0.57,40.0)$, $(0.72,50.0)$ and $(0.88,60.0)$ accurately. Draw a thin best-fit line.

1(f)

  • Use $G = \Delta d/\Delta(1/T)$. Draw a large triangle on the best-fit line and read its horizontal and vertical changes.
  • For example, using approximately $(0.28\,\mathrm{1/s},20\,\mathrm{cm})$ and $(0.88\,\mathrm{1/s},60\,\mathrm{cm})$, $G \approx (40\,\mathrm{cm})/(0.60\,\mathrm{1/s}) = \mathbf{67}\,\mathrm{cm\,s}$.

1(g)(i)

  • Timing five oscillations makes reaction-time error a smaller percentage of the measured time.

1(g)(ii)

  • Repeat each timing and calculate the mean to reduce the effect of random errors.
Original question

Log in or create account

IGCSE, A-Level & AP