Students are investigating the cooling of hot water in a beaker.
They are using the apparatus shown in Fig. 2.1.

Record room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.
$\theta_R$ = [1]
A volume of 150 cm$^3$ of hot water is poured into the beaker and the initial temperature $\theta$ is recorded in Table 2.1.
The temperature of the water is recorded every 30 s. The values are shown in Table 2.1.
Complete the headings in Table 2.1.[1]
| t/ | $\theta$/ |
| 0 | 95.0 |
| 30 | 89.0 |
| 60 | 83.5 |
| 90 | 79.0 |
| 120 | 75.0 |
| 150 | 71.5 |
| 180 | 68.5 |
| 210 | 66.0 |
| 240 | 64.0 |
| 270 | 62.5 |
Describe one precaution that you would take to ensure that the temperature readings in the experiment are as accurate as possible.[1]
Calculate the average cooling rate $x_1$ during the first 90 s of the experiment. Use the readings from Table 2.1 and the equation
$x_1 = \frac{\theta_0 - \theta_{90}}{T}$
where $T = 90$ s and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90$ s.
Include the unit for the cooling rate.
$x_1$ = [1]
Calculate the average cooling rate $x_2$ during the middle 90 s of the experiment. Use the readings from Table 2.1 and the equation
$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$
where $T = 90$ s and $\theta_{90}$ and $\theta_{180}$ are the temperatures at $t = 90$ s and $t = 180$ s.
$x_2$ = [1]
Calculate the average cooling rate $x_3$ during the last 90 s of the experiment. Use the readings from Table 2.1 and the equation
$x_3 = \frac{\theta_{180} - \theta_{270}}{T}$
where $T = 90$ s and $\theta_{180}$ and $\theta_{270}$ are the temperatures at $t = 180$ s and $t = 270$ s.
$x_3$ = [1]
The temperature of the water falls as time passes. Use the results from (c) to describe the pattern of the rate of cooling of the water during the experiment.
Justify your answer by reference to the results.[1]
Give an estimate of the probable final temperature $\theta_F$ of the water if left to cool for many hours.
$\theta_F$ = [1]
A student in another school carries out a similar experiment.
She starts with the hot water at a lower initial temperature.
Suggest how her cooling rates are likely to compare with those calculated in (c).
Use the results to explain your answer.
suggestion
explanation [2]
State one variable, other than the initial temperature, which the student should control.[1]