Skip to content

IGCSE Physics · March 2020 · Paper 62 · Difficulty 3 · Standard

Question 1

1

A student is determining the density of wood by two methods.

He is using the wooden rod shown in Fig. 1.1.

Method 1

The dimensions of the wooden rod are shown full size in Fig. 1.2.

(a)
(i)

Measure the length $l$ and the diameter $d$ of the wooden rod in Fig. 1.2.

$l$ = cm

$d$ = cm[2]

(ii)

Suggest an accurate method for measuring the diameter of the wooden rod in this experiment.

List any additional apparatus that might be required and briefly describe how you would determine the diameter.

You may draw a diagram if it helps to explain your answer.

[2]

(b)

The student uses a balance to measure the mass $m$ of the wooden rod as shown in Fig. 1.3.

Record the mass $m$ of the rod.

$m$ = g

Calculate a value $\rho_1$ for the density of the wooden rod. Use your values from (a)(i) and (b) and the equation $\rho_1 = \frac{4m}{\pi d^2 l}$. Include a suitable unit.

$\rho_1$ = [2]

Method 2

(c)

The student pours water into a measuring cylinder as shown in Fig. 1.4.

He then floats the wooden rod in the water as shown in Fig. 1.5.

Record the reading $V_1$ of the water level in the measuring cylinder as shown in Fig. 1.4.

$V_1$ = cm$^3$

Record the new reading $V_2$ of the water level in the measuring cylinder with the rod floating in the water as shown in Fig. 1.5.

$V_2$ = cm$^3$[1]

(d)

The student removes the rod and lowers a piece of modelling clay into the water as shown in Fig. 1.6.

He then hooks the rod to the modelling clay and lowers them into the water as shown in Fig. 1.7.

He records the new reading $V_3$ of the water level in the measuring cylinder with the modelling clay.

He records the reading $V_4$ of the water level in the measuring cylinder with the modelling clay and rod.

$V_3$ = 164 cm$^3$

$V_4$ = 178 cm$^3$

Calculate another value $\rho_2$ for the density of the wooden rod. Use the values from (c) and (d) and the equation $\rho_2 = \frac{(V_2 - V_1)}{(V_4 - V_3)} \times k$ where $k = 1.0 \text{g/cm}^3$.

$\rho_2$ = [2]

(e)

On Fig. 1.8, draw an arrow showing the correct line of sight for reading the volume of water in the measuring cylinder.[1]

(f)

Suggest a possible source of inaccuracy in Method 2, even if it was carried out carefully.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Measure along the rod and across its widest part: $l = \mathbf{4.5}\,\mathrm{cm}$ and $d = \mathbf{2.0}\,\mathrm{cm}$.

1(a)(ii)

  • Use vernier callipers to measure the diameter at several places along the rod.
  • Find the mean of the readings to reduce the effect of variations in diameter.

1(b)

  • The balance gives $m = \mathbf{7.8}\,\mathrm{g}$. Use $\rho_1 = 4m/(\pi d^2l)$.
  • $\rho_1 = 4(7.8\,\mathrm{g})/[\pi(2.0\,\mathrm{cm})^2(4.5\,\mathrm{cm})] = \mathbf{0.55}\,\mathrm{g/cm^3}$.

1(c)

  • Read the bottom of each meniscus: $V_1 = \mathbf{144}\,\mathrm{cm^3}$ and $V_2 = \mathbf{152}\,\mathrm{cm^3}$.

1(d)

  • Use $\rho_2 = [(V_2-V_1)/(V_4-V_3)]k$.
  • $\rho_2 = [(152-144)\,\mathrm{cm^3}]/[(178-164)\,\mathrm{cm^3}](1.0\,\mathrm{g/cm^3}) = \mathbf{0.57}\,\mathrm{g/cm^3}$.

1(e)

  • Draw a horizontal arrow towards the bottom of the meniscus, perpendicular to the cylinder, to avoid parallax.

1(f)

  • The wood may absorb water, changing the measured displacement.
Original question

Log in or create account

IGCSE, A-Level & AP