Skip to content

IGCSE Physics · March 2020 · Paper 62 · Difficulty 3 · Standard

Question 3

3

A student is investigating a power supply.

She is using the circuit shown in Fig. 3.1.

(a)

The student connects the crocodile clip to a length $l = 100.0\text{ cm}$ of the resistance wire and measures the potential difference $V_0$ across terminals P and Q and the current $I_0$ in the circuit.

Fig. 3.2 Fig. 3.3

(i)

Record the values of $V_0$ and $I_0$ shown on the meters in Fig. 3.2 and Fig. 3.3.

$V_0 =$ $\text{V}$

$I_0 =$ $\text{A}$[1]

(ii)

Calculate the resistance $R_0$ of $100.0\text{ cm}$ of the wire. Use your values of $V_0$ and $I_0$ and the equation $R_0 = \frac{V_0}{I_0}$.

$R_0 =$ $\Omega$[1]

(b)

The student then connects the crocodile clip to lengths $l = 70.0\text{ cm}$, $60.0\text{ cm}$, $50.0\text{ cm}$, $40.0\text{ cm}$ and $30.0\text{ cm}$ of the resistance wire. She measures the current $I$ in the circuit for each length. Her readings are shown in Table 3.1.

Table 3.1

$l/\text{cm}$$I/\text{A}$$\frac{1}{I}/\frac{1}{\text{A}}$
70.00.35
60.00.402.50
50.00.442.27
40.00.531.89
30.00.651.54

Calculate, and record in Table 3.1, the value of $\frac{1}{I}$ for length $l = 70.0\text{ cm}$ of the wire.[1]

(c)

Plot a graph of $l/\text{cm}$ ($y$-axis) against $\frac{1}{I}/\frac{1}{\text{A}}$ ($x$-axis). You do not need to start your axes at the origin (0,0).

[4]

(d)
(i)

Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.

$G =$ [1]

(ii)

Calculate the electromotive force (e.m.f.) $E$ of the power supply. Use your value of $R_0$ from (a)(ii) and the equation $E = \frac{G \times R_0}{k}$, where $k = 100\text{ cm}$.

$E =$ $\text{V}$[1]

(e)

The ammeter in this circuit has a small resistance which affects the current. The effect of this resistance on the measured current $I$ will be different for each measured length $l$ of the resistance wire.

State and explain which length $l$ will be most affected by the resistance of the ammeter.

statement

explanation

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • The meter readings are $V_0 = \mathbf{2.1}\,\mathrm{V}$ and $I_0 = \mathbf{0.26}\,\mathrm{A}$.

3(a)(ii)

  • Use $R_0 = V_0/I_0$.
  • $R_0 = (2.1\,\mathrm{V})/(0.26\,\mathrm{A}) = \mathbf{8.1}\,\mathrm{\Omega}$.

3(b)

  • Use $1/I$ for the reciprocal current.
  • $1/I = 1/(0.35\,\mathrm{A}) = \mathbf{2.86}\,\mathrm{1/A}$.

3(c)

  • Label the horizontal axis $1/I$ in $\mathrm{1/A}$ and the vertical axis $l$ in $\mathrm{cm}$. Choose scales that use at least half the grid.
  • Plot $(2.86,70.0)$, $(2.50,60.0)$, $(2.27,50.0)$, $(1.89,40.0)$ and $(1.54,30.0)$, then draw a thin best-fit line.

3(d)(i)

  • Use $G = \Delta l/\Delta(1/I)$, taking two well-separated points on your best-fit line and drawing a large gradient triangle.
  • For example, $G = (68.1-31.2)\,\mathrm{cm}/[(2.8-1.6)\,\mathrm{1/A}] \approx \mathbf{31}\,\mathrm{cm\,A}$. Your value depends on your line.

3(d)(ii)

  • Use $E = GR_0/k$.
  • $E = (31\,\mathrm{cm\,A})(8.1\,\mathrm{\Omega})/(100\,\mathrm{cm}) = \mathbf{2.5}\,\mathrm{V}$; use your own gradient.

3(e)

  • The $\mathbf{30.0}\,\mathrm{cm}$ length is most affected.
  • It has the smallest wire resistance, so the ammeter makes up a greater fraction of the total resistance.
Original question

Log in or create account

IGCSE, A-Level & AP