Skip to content

IGCSE Physics · March 2020 · Paper 52 · Difficulty 3 · Standard

Question 2

2

In this experiment, you will investigate the cooling of hot water in a beaker.

Carry out the following instructions, referring to Fig. 2.1.

(a)
(i)

Measure the room temperature $\theta_R$ shown on the thermometer.

$\theta_R$ = [1]

(ii)

Pour 150 cm$^3$ of hot water into the beaker.

Place the thermometer in the water in the beaker.

In the first row of Table 2.1, record the temperature $\theta$ of the water at time $t = 0$ and immediately start the stop-clock.

In Table 2.1, record the temperature $\theta$ of the water at times $t = 30\text{s}$, $60\text{s}$, $90\text{s}$, $120\text{s}$, $150\text{s}$, $180\text{s}$, $210\text{s}$, $240\text{s}$ and $270\text{s}$.[1]

(b)

Complete the headings in Table 2.1.[1]

Table 2.1

$t$ /$\theta$ /
0
30
60
90
120
150
180
210
240
270
(c)
(i)

Calculate the average cooling rate $x_1$ during the first 90s of the experiment. Use your readings from Table 2.1 and the equation

$x_1 = \frac{\theta_0 - \theta_{90}}{T}$

where $T = 90\text{s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures at $t = 0$ and $t = 90\text{s}$.

Include the unit for the cooling rate.

$x_1$ = [1]

(ii)

Calculate the average cooling rate $x_2$ during the middle 90s of the experiment. Use your readings from Table 2.1 and the equation

$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$

where $T = 90\text{s}$ and $\theta_{90}$ and $\theta_{180}$ are the temperatures at $t = 90\text{s}$ and $t = 180\text{s}$.

$x_2$ = [1]

(iii)

Calculate the average cooling rate $x_3$ during the last 90s of the experiment. Use your readings from Table 2.1 and the equation

$x_3 = \frac{\theta_{180} - \theta_{270}}{T}$

where $T = 90\text{s}$ and $\theta_{180}$ and $\theta_{270}$ are the temperatures at $t = 180\text{s}$ and $t = 270\text{s}$.

$x_3$ = [1]

(d)
(i)

The temperature of the water falls as time passes. Use your results from (c) to describe the pattern of the rate of cooling of the water during the experiment.

Justify your answer by reference to your results.[1]

(ii)

Give an estimate of the probable final temperature $\theta_F$ of the water if left to cool for many hours.

$\theta_F$ = [1]

(e)
(i)

A student in another school carries out a similar experiment.

She starts with the hot water at a lower initial temperature.

Suggest how her cooling rates are likely to compare with those calculated in (c).

Use your results to explain your answer.

suggestion

explanation [2]

(ii)

State one variable, other than the initial temperature, which the student should control.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • Read your thermometer at eye level. For example, the room temperature could be $\theta_R = \mathbf{20}\,\mathrm{°C}$; the diagram does not give a numbered reading.

2(a)(ii)

  • Record your thermometer reading at each time in the table, to at least the nearest $1\,\mathrm{°C}$.
  • The temperatures should decrease as the water cools. The actual readings depend on your experiment.

2(b)

  • Use $t/\mathrm{s}$ and $\theta/{}^{\circ}\mathrm{C}$ as the headings.

2(c)(i)

  • Use $x_1 = \dfrac{\theta_0-\theta_{90}}{T}$, the temperature fall divided by the time.
  • For example, if $\theta_0 = 80\,\mathrm{°C}$ and $\theta_{90} = 71\,\mathrm{°C}$, $x_1 = \dfrac{(80-71)\,\mathrm{°C}}{90\,\mathrm{s}} = \mathbf{0.10}\,\mathrm{°C/s}$. Use your own readings.

2(c)(ii)

  • Use $x_2 = \dfrac{\theta_{90}-\theta_{180}}{T}$, the temperature fall divided by the time.
  • For example, if $\theta_{90} = 71\,\mathrm{°C}$ and $\theta_{180} = 64\,\mathrm{°C}$, $x_2 = \dfrac{(71-64)\,\mathrm{°C}}{90\,\mathrm{s}} = \mathbf{0.078}\,\mathrm{°C/s}$. Use your own readings.

2(c)(iii)

  • Use $x_3 = \dfrac{\theta_{180}-\theta_{270}}{T}$, the temperature fall divided by the time.
  • For example, if $\theta_{180} = 64\,\mathrm{°C}$ and $\theta_{270} = 59\,\mathrm{°C}$, $x_3 = \dfrac{(64-59)\,\mathrm{°C}}{90\,\mathrm{s}} = \mathbf{0.056}\,\mathrm{°C/s}$. Use your own readings.

2(d)(i)

  • The cooling rate decreases with time: your calculated rates should show $x_1 > x_2 > x_3$.
  • For example, rates of $0.10$, $0.078$ and $0.056\,\mathrm{°C/s}$ show this decrease. Quote your own values as evidence.

2(d)(ii)

  • After many hours, the water should reach room temperature, $\theta_F = \theta_R$.

2(e)(i)

  • The cooling rates should be smaller at equivalent times.
  • The rate is smaller at lower water temperatures. In the example above, it falls from $0.10\,\mathrm{°C/s}$ in the first 90 s to $0.056\,\mathrm{°C/s}$ in the last 90 s. Quote your own values.

2(e)(ii)

  • Keep the volume of water the same so it is a fair comparison.
Original question

Log in or create account

IGCSE, A-Level & AP