| English | 释义 | 拼音 |
|---|---|---|
| ligand exchange/ˈlɪɡænd eksˈtʃeɪndʒ/ | 配体交换 | pèi tǐ jiāo huàn |
| redox titration/rɪˈdɒks taɪˈtreɪʃn/ | 氧化还原滴定 | yǎng huà huán yuán dī dìng |
| feasible/ˈfiːzɪbl/ | 可行 | kě xíng |
| thiosulfate/ˌθaɪəʊˈsʌlfeɪt/ | 硫代硫酸盐 | liú dài liú suān yán |
| coordination number/kəʊˈɔːdɪneɪʃn ˈnʌmbə/ | 配位数 | pèi wèi shù |
Swapping the surroundings
- Swimming pools treated with copper compounds can turn hair green: the copper ion picks up new ligands. In ligand exchange 配体交换, one ligand replaces another, often with a colour change.
- Transition-metal ions also take part in redox titrations 氧化还原滴定, which measure amounts accurately.
Ligand exchange route
Follow one ligand replacing another around a metal ion.
Ligand exchange is when:
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Swapping a ligand for another changes the complex and usually its colour.
In ligand exchange, one ligand is replaced by another around the central metal ion.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
It can change the complex's colour.
Ligand exchange (copper II)
- $[\text{Cu}(\text{H}_2\text{O})_6]^{2+}$ is pale blue.
- Add ammonia: first a pale blue precipitate of Cu(OH)₂ forms (NH₃ acts as a base). In excess ammonia it dissolves to give deep blue $[\text{Cu}(\text{NH}_3)_4(\text{H}_2\text{O})_2]^{2+}$.
- Add concentrated HCl → $[\text{CuCl}_4]^{2-}$, yellow.

Ligand exchange changes the colour of copper(II)
Adding concentrated HCl to pale-blue [Cu(H₂O)₆]²⁺ gives:
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Chloride ligands replace water, giving the yellow tetrachlorocuprate(II) ion.
Match each colour change.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Each item links the term to its correct meaning.
Aqueous ammonia is added drop by drop to copper(II) sulfate solution until in excess. What do you see?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
A little NH₃ gives Cu(OH)₂ (pale blue precipitate). Excess NH₃ exchanges ligands to form deep blue [Cu(NH₃)₄(H₂O)₂]²⁺.
Redox titrations
- Use $E^{\ominus}$ values to predict whether a redox reaction is feasible 可行.
- Classic titrations: $\text{MnO}_4^-$ with $\text{Fe}^{2+}$ (purple → colourless), and $\text{Cu}^{2+}$ with $\text{I}^-$ (makes iodine, then titrated with thiosulfate 硫代硫酸盐).
In a MnO₄⁻/Fe²⁺ titration in acid, the colour change at the end point is:
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
MnO₄⁻ (purple) is reduced to colourless Mn²⁺; the first excess drop gives a faint pink.
To predict whether a redox reaction of transition ions happens, you use:
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
A positive E°cell (from the E° values) tells you the redox reaction is feasible.
Worked example: a manganate(VII) titration
$25.0\ \text{cm}^3$ of $\text{Fe}^{2+}$ solution needs $20.0\ \text{cm}^3$ of $0.0200\ \dfrac{\text{mol}}{\text{dm}^3}$ $\text{KMnO}_4$. The equation is $\text{MnO}_4^- + 5\text{Fe}^{2+} + 8\text{H}^+ \rightarrow \text{Mn}^{2+} + 5\text{Fe}^{3+} + 4\text{H}_2\text{O}$.
- Moles of $\text{MnO}_4^- = 0.0200 \times \dfrac{20.0}{1000} = 4.00 \times 10^{-4}$. The ratio is $1:5$, so moles of $\text{Fe}^{2+} = 2.00 \times 10^{-3}$.
- $[\text{Fe}^{2+}] = \dfrac{2.00 \times 10^{-3}}{0.0250} = 0.0800\ \dfrac{\text{mol}}{\text{dm}^3}$. No indicator is needed: the end point is the first permanent pale pink.
$25.0\ \text{cm}^3$ of $\text{Fe}^{2+}$ solution needs $22.5\ \text{cm}^3$ of $0.0100\ \dfrac{\text{mol}}{\text{dm}^3}$ $\text{KMnO}_4$. Find $[\text{Fe}^{2+}]$ 入 $\dfrac{\text{mol}}{\text{dm}^3}$.
难度 2/5 · 今日首次完成可获 140 金币及少量额外奖励
Moles of $\text{MnO}_4^- = 0.0100 \times 0.0225 = 2.25 \times 10^{-4}$; moles of $\text{Fe}^{2+} = 5 \times 2.25 \times 10^{-4} = 1.125 \times 10^{-3}$; divide by $0.0250\ \text{dm}^3$ to get $0.045\ \dfrac{\text{mol}}{\text{dm}^3}$.
Why is a manganate(VII) titration acidified with dilute sulfuric acid, not hydrochloric acid?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Cl⁻ is oxidised by MnO₄⁻, so the titre would be too large. Sulfate is not oxidised.
Cobalt(II) and a change of shape
- With concentrated HCl, pink $[\text{Co}(\text{H}_2\text{O})_6]^{2+}$ turns into blue $[\text{CoCl}_4]^{2-}$. Chloride ions are larger than water molecules, so only four fit: the coordination number 配位数 falls from 6 to 4 and the shape goes from octahedral to tetrahedral.
- The change is an equilibrium: $[\text{Co}(\text{H}_2\text{O})_6]^{2+} + 4\text{Cl}^- \rightleftharpoons [\text{CoCl}_4]^{2-} + 6\text{H}_2\text{O}$. Adding water shifts it back to the left, and the pink returns.
Why does $[\text{Co}(\text{H}_2\text{O})_6]^{2+}$ become a four-coordinate complex in concentrated HCl?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Four large $\text{Cl}^-$ ligands replace six water ligands, giving a tetrahedral, blue $[\text{CoCl}_4]^{2-}$.
- With ammonia, describe both stages: pale blue precipitate, then deep blue solution in excess.
- Ammonia and water are similar in size, so the coordination number stays 6. Cl⁻ is larger, so it falls to 4.
- In a MnO₄⁻ titration no indicator is needed, and the acid must be dilute sulfuric acid (HCl would be oxidised).
You've got it
- ligand exchange swaps one ligand for another (colour change)
- copper(II): pale blue (water) → deep blue (ammonia) → yellow ($[\text{CuCl}_4]^{2-}$)
- cobalt(II): pink $[\text{Co}(\text{H}_2\text{O})_6]^{2+}$ → blue $[\text{CoCl}_4]^{2-}$ with conc. HCl; coordination number 6 → 4 (large $\text{Cl}^-$)
- titration maths: moles of titrant → mole ratio from the equation ($\text{MnO}_4^-:\text{Fe}^{2+} = 1:5$) → concentration
- use $E^{\ominus}$ for feasibility; classic titrations: $\text{MnO}_4^-/\text{Fe}^{2+}$ (purple → colourless), $\text{Cu}^{2+}/\text{I}^-$