Skip to content

IGCSE Physics · November 2022 · Paper 53 · Difficulty 3 · Standard

Question 2

2

In this experiment, you will investigate the effect of the colour of the outside surface of a beaker on the rate of cooling of water in the beaker.

Carry out the following instructions, referring to Fig. 2.1.

Beaker A is covered with thin black card.

Beaker B is covered with shiny metal foil.

Fig. 2.1
(a)

Remove the lid from beaker A.

Pour 150 cm$^{3}$ of hot water into beaker A and replace the lid.

Place the thermometer in the water.

In the first row of Table 2.1, record the temperature $\theta$ of the water at time $t = 0$ and immediately start the stop-clock.

Record the temperature $\theta$ of the water at $t = 30\text{s}$, $t = 60\text{s}$, $t = 90\text{s}$, $t = 120\text{s}$, $t = 150\text{s}$ and $t = 180\text{s}$.

Remove the thermometer from the beaker.[1]

(b)
(i)

Repeat (a) for beaker B.[2]

(ii)

Add units to the column headings in Table 2.1.[1]

Table 2.1

beaker A with black cardbeaker B with shiny foil
$t/$$\theta/$$\theta/$
0
30
60
90
120
150
180
(c)

Write a conclusion stating if the colour of the outside surface of the beaker affects the rate of cooling of the water in the beaker.

Justify your answer by reference to values from your results.[2]

(d)
(i)

Calculate the average cooling rate $x_{A}$ for the water in beaker A during the experiment.

Use your readings for beaker A from Table 2.1 and the equation

$x_{A} = \frac{\theta_{0} - \theta_{180}}{T}$

where $T = 180\text{s}$ and $\theta_{0}$ and $\theta_{180}$ are the temperatures of the water in beaker A at times $t = 0$ and $t = 180\text{s}$.

Include the unit for the cooling rate.

$x_{A} = ......................................................... [1]$

(ii)

Calculate the average cooling rate $x_{B}$ for the water in beaker B during the experiment.

Use your readings for beaker B from Table 2.1 and the equation

$x_{B} = \frac{\theta_{0} - \theta_{180}}{T}$

where $T = 180\text{s}$ and $\theta_{0}$ and $\theta_{180}$ are the temperatures of the water in beaker B at times $t = 0$ and $t = 180\text{s}$.

Include the unit.

$x_{B} = ......................................................... [1]$

(e)
(i)

A student states that the black card is a thermal insulator. He thinks this will affect the result.

Suggest an additional experiment to test this theory.

You are not required to carry out this additional experiment.[1]

(ii)

Suggest one variable which should be kept the same for this additional experiment so that the comparison with your experiment is fair. Assume that the same type of beaker is used.[1]

(iii)

State how the cooling rate of beaker A from the additional experiment is likely to compare with $x_{A}$ from (d)(i) if the student’s theory is correct. Explain your answer.

statement

explanation [1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Record the temperature at each stated time. The readings should fall as the hot water cools.

2(b)(i)

  • Record the temperature of beaker B at each time, to at least the nearest $1\,\mathrm{°C}$.
  • The readings should fall, but more slowly than for beaker A: the shiny foil reduces heat loss by radiation.

2(b)(ii)

  • Label the time column $t\,/\,\mathrm{s}$ and both temperature columns $\theta\,/\,{}^\circ\mathrm{C}$.

2(c)

  • Compare the temperature drops over $180\,\mathrm{s}$ for the two beakers. Use your own readings to decide whether the surface affects cooling.
  • For example, if A falls from $80\,\mathrm{°C}$ to $68\,\mathrm{°C}$ and B from $80\,\mathrm{°C}$ to $72\,\mathrm{°C}$, A falls by $12\,\mathrm{°C}$ and B by $8\,\mathrm{°C}$, so the black beaker cools faster.

2(d)(i)

  • Use $x_A = (\theta_0 - \theta_{180})/T$ for beaker A.
  • For example, if A cools from $80\,\mathrm{°C}$ to $68\,\mathrm{°C}$, $x_A = (80 - 68)\,\mathrm{°C}/(180\,\mathrm{s}) = \mathbf{0.067}\,\mathrm{°C/s}$. Use your own readings.

2(d)(ii)

  • Use $x_B = (\theta_0 - \theta_{180})/T$ for beaker B.
  • For example, if B cools from $80\,\mathrm{°C}$ to $72\,\mathrm{°C}$, $x_B = (80 - 72)\,\mathrm{°C}/(180\,\mathrm{s}) = \mathbf{0.044}\,\mathrm{°C/s}$. Use your own readings; B should cool more slowly than A.

2(e)(i)

  • Repeat the experiment with the outside of beaker A painted black instead of covered with black card.

2(e)(ii)

  • Keep the initial water temperature the same so it does not affect the comparison.

2(e)(iii)

  • The cooling rate would be greater than $x_A$: without the insulating card, energy can leave the beaker more quickly.
Original question

Log in or create account

IGCSE, A-Level & AP