Skip to content

IGCSE Physics · November 2021 · Paper 63 · Difficulty 3 · Standard

Question 1

1

A student investigates the effect of insulation on the cooling of water.

She uses the apparatus shown in Fig. 1.1.

The sides of beaker A are covered with material that is a thermal insulator.

Beaker B has no covering on its sides.

(a)

Record room temperature $\theta_R$ shown on the thermometer in Fig. 1.1.

$\theta_R$ = [1]

(b)

The student pours $150\text{cm}^3$ of hot water into beaker A and records the temperature $\theta$ at time $t = 0$.

She records, in Table 1.1, the temperature of the water in the beaker every $30\text{s}$. The student repeats the process for beaker B.

Add units to the column headings in Table 1.1.[1]

Table 1.1

beaker A with insulationbeaker B without insulation
$t/$$\theta/$$\theta/$
088.087.5
3086.083.5
6084.581.5
9083.580.0
12082.579.0
15082.078.5
18081.578.0
(c)

Describe two precautions that can be taken to ensure that temperature readings in the experiment are as accurate as possible.

[2]

(d)

Write a conclusion stating whether the insulation affects the rate of cooling of the water. Justify your answer by reference to values from the results.

[2]

(e)
(i)

Calculate the average cooling rate $x_1$ during the first half of the experiment for the water in beaker B. Use the readings for beaker B from Table 1.1 and the equation

$x_1 = \frac{\theta_0 - \theta_{90}}{T}$

where $T = 90\text{s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures of the water in beaker B at $t = 0$ and $t = 90\text{s}$.

Include the unit.

$x_1 =$ [1]

(ii)

Calculate the average cooling rate $x_2$ during the second half of the experiment for the water in beaker B. Use the readings for beaker B from Table 1.1 and the equation

$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$

where $T = 90\text{s}$ and $\theta_{90}$ and $\theta_{180}$ are the temperatures of the water in beaker B at $t = 90\text{s}$ and $t = 180\text{s}$.

Include the unit.

$x_2 =$ [1]

(f)
(i)

Suggest an additional experiment to test whether the lid affects the cooling rate of the water in beaker B. State how the readings are used to show the effect.

[1]

(ii)

A student suggests that the temperature of the water in beaker B at $t = 0$ for this additional experiment must be the same as in (b) for the comparison to be fair.

State whether your results support this suggestion.

Use your results from (e) to explain whether this precaution is necessary.

statement

explanation

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Read the thermometer scale at the top of the liquid. Room temperature is $\mathbf{21}\,{}^\circ\mathrm{C}$.

1(b)

  • Time is measured in seconds and temperature in degrees Celsius. The headings are $t / \mathrm{s}$ and $\theta / {}^\circ\mathrm{C}$ for each beaker.

1(c)

  • View the thermometer scale at eye level to avoid a parallax error.
  • Keep the thermometer bulb away from the beaker so it measures the water temperature.

1(d)

  • The insulation reduces the rate of cooling.
  • In $180\,\mathrm{s}$, A cools by $6.5\,{}^\circ\mathrm{C}$, while B cools by $9.5\,{}^\circ\mathrm{C}$. The insulated water has the smaller temperature drop in the same time.

1(e)(i)

  • Use $x_1 = (\theta_0 - \theta_{90})/T$.
  • $x_1 = (87.5\,{}^\circ\mathrm{C} - 80.0\,{}^\circ\mathrm{C})/90\,\mathrm{s} = \mathbf{0.083}\,{}^\circ\mathrm{C/s}$.

1(e)(ii)

  • Use $x_2 = (\theta_{90} - \theta_{180})/T$.
  • $x_2 = (80.0\,{}^\circ\mathrm{C} - 78.0\,{}^\circ\mathrm{C})/90\,\mathrm{s} = \mathbf{0.022}\,{}^\circ\mathrm{C/s}$.

1(f)(i)

  • Repeat the experiment with beaker B without its lid. Calculate its cooling rate and compare it with the rate with the lid on.

1(f)(ii)

  • Yes. The water cools at about $0.083\,{}^\circ\mathrm{C/s}$ in the first half and $0.022\,{}^\circ\mathrm{C/s}$ in the second half.
  • Cooling rate changes as the water temperature falls, so the starting temperatures must be the same for a fair comparison.
Original question

Log in or create account

IGCSE, A-Level & AP