Skip to content

IGCSE Physics · November 2021 · Paper 63 · Difficulty 3 · Standard

Question 2

2

A student compares the resistances of two wires.

She uses the circuit, part of which is shown in Fig. 2.1.

(a)

On Fig. 2.1, complete the circuit diagram to show a voltmeter connected to measure the potential difference (p.d.) across terminals X and Y, and an ammeter connected to measure the current in the circuit.[2]

(b)

The student connects the crocodile clip to a length $l = 90.0\text{ cm}$ of resistance wire A and measures the potential difference $V$ and the current $I$ for the length $l$ of the wire.

(i)

Read, and record in Table 2.1, the values of $V$ and $I$ shown on the meters in Fig. 2.2 and Fig. 2.3.[2]

Table 2.1

wire$l\text{ /cm}$$V\text{ /}$$I\text{ /}$$R\text{ /}$
A90.0
B90.02.60.45
A50.02.70.54
B50.02.30.72
(ii)

The student then connects the crocodile clip to lengths $l = 90.0\text{ cm}$ of wire B, $l = 50.0\text{ cm}$ of wire A and $l = 50.0\text{ cm}$ of wire B.

Her readings are shown in Table 2.1.

Calculate, and record in Table 2.1, the resistance $R$ of each length of wire A and wire B.

Use the values of $V$ and $I$ and the equation

$$R = \frac{V}{I} .$$

[2]

(iii)

Complete the headings in Table 2.1.[1]

(c)
(i)

Calculate a value $P$ using your results from Table 2.1 and the equation

$$P = \frac{R\text{ for } 90.0\text{ cm of wire A}}{R\text{ for } 90.0\text{ cm of wire B}} .$$

$P =$

Calculate a value $Q$ using your results from Table 2.1 and the equation

$$Q = \frac{R\text{ for } 50.0\text{ cm of wire A}}{R\text{ for } 50.0\text{ cm of wire B}} .$$

$Q =$ [1]

(ii)

A student suggests that the values of $P$ and $Q$ should be equal.

State whether your results support this suggestion. Justify your answer by reference to values from your results.

statement

justification [2]

(d)

Suggest one reason why students all doing this experiment carefully with the same apparatus may not obtain the same results.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Connect the ammeter in series in the complete circuit so all the current passes through it.
  • Connect the voltmeter in parallel between X and Y to measure the potential difference across them.

2(b)(i)

  • Read each scale at the pointer. The values are $\mathbf{2.8}\,\mathrm{V}$ and $\mathbf{0.32}\,\mathrm{A}$.

2(b)(ii)

  • Use $R = V/I$ for each row.
  • For $90.0\,\mathrm{cm}$: wire A has $R = 2.8\,\mathrm{V}/0.32\,\mathrm{A} = \mathbf{8.75}\,\Omega$; wire B has $R = 2.6\,\mathrm{V}/0.45\,\mathrm{A} = \mathbf{5.78}\,\Omega$.
  • For $50.0\,\mathrm{cm}$: wire A has $R = 2.7\,\mathrm{V}/0.54\,\mathrm{A} = \mathbf{5.00}\,\Omega$; wire B has $R = 2.3\,\mathrm{V}/0.72\,\mathrm{A} = \mathbf{3.19}\,\Omega$.

2(b)(iii)

  • The headings are $V / \mathrm{V}$, $I / \mathrm{A}$ and $R / \Omega$: potential difference is in volts, current in amperes and resistance in ohms.

2(c)(i)

  • Use $P = R_{A,90}/R_{B,90}$ and $Q = R_{A,50}/R_{B,50}$.
  • $P = 8.75\,\Omega/5.78\,\Omega = \mathbf{1.51}$ and $Q = 5.00\,\Omega/3.19\,\Omega = \mathbf{1.57}$.

2(c)(ii)

  • Yes. $P = 1.51$ and $Q = 1.57$ are close enough to agree within experimental accuracy.

2(d)

  • The crocodile clip may not connect at exactly the same length each time, changing the length of wire in the circuit.
Original question

Log in or create account

IGCSE, A-Level & AP