Skip to content

IGCSE Physics · November 2020 · Paper 63 · Difficulty 3 · Standard

Question 1

1

Some students investigate the transfer of thermal energy from a beaker of hot water.

They use the apparatus shown in Fig. 1.1.

Fig. 1.1
(a)

Fig. 1.2 shows the reading on the thermometer at the start of the investigation.

Fig. 1.2

Record the room temperature $\theta_R$ shown on the thermometer in Fig. 1.2.

$\theta_R$ = [1]

(b)

A student pours $100\text{cm}^3$ of hot water into beaker A.

He records the temperature of the water in beaker A and immediately starts a stopclock.

The student records the temperature $\theta$ of the water every $30\text{s}$. His readings are shown in Table 1.1.

The student repeats the procedure for beaker B. Beaker B is fitted with a lid.

Complete the headings and the time column in Table 1.1.

beaker A
without a lid
beaker B
with a lid
$t/$$\theta_A/$$\theta_B/$
085.086.0
79.083.0
73.580.5
68.578.5
64.077.0
60.076.5
56.576.0

Table 1.1[2]

(c)

Describe a precaution that should be taken to ensure that the temperature readings are as accurate as possible in this experiment.

[1]

(d)
(i)

Write a conclusion stating how using the lid affects the cooling of the water.

[1]

(ii)

The temperature of the water in each beaker decreases during this investigation.

Describe one other similarity in the pattern of the cooling of water in beakers A and B.

[1]

(e)
(i)

Calculate the average rate of cooling $x_A$ of the water in beaker A. Use the values of $\theta_A$ from Table 1.1 and the equation $x_A = \frac{(\theta_0 - \theta_{180})}{T}$

where $\theta_0$ is the temperature of the water in beaker A at $t = 0$, $\theta_{180}$ is the temperature of the water at $t = 180\text{s}$, and $T = 180\text{s}$.

Include a unit.

$x_A$ = [1]

(ii)

Calculate the average rate of cooling $x_B$ of the water in beaker B. Use the values of $\theta_B$ from Table 1.1 and the equation $x_B = \frac{(\theta_0 - \theta_{180})}{T}$

where $\theta_0$ is the temperature of the water in beaker B at $t = 0$, $\theta_{180}$ is the temperature of the water at $t = 180\text{s}$, and $T = 180\text{s}$.

$x_B$ = [1]

(iii)

Thermal energy is transferred from the surface of the water and from the sides of the beaker during the investigation.

A student suggests that more thermal energy is transferred from the surface of the water than from the sides of the beaker.

State whether your results support this suggestion. Justify your statement by reference to your values of $x_A$, the average rate of cooling without a lid, and $x_B$, the average rate of cooling with a lid.

statement

justification [2]

(f)

Suggest a change to the apparatus or the procedure to produce a greater difference between $x_A$ and $x_B$.

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Read the thermometer scale at the liquid level: $\theta_R = \mathbf{24}\,^{\circ}\mathrm{C}$.

1(b)

  • Use the headings $t/\mathrm{s}$, $\theta_A/\,^{\circ}\mathrm{C}$ and $\theta_B/\,^{\circ}\mathrm{C}$.
  • The times are $\mathbf{0}$, $\mathbf{30}$, $\mathbf{60}$, $\mathbf{90}$, $\mathbf{120}$, $\mathbf{150}$ and $\mathbf{180}\,\mathrm{s}$.

1(c)

  • Read the thermometer at right angles to the scale to avoid parallax error.

1(d)(i)

  • The water with a lid cools more slowly: its temperature falls by less over the same time.

1(d)(ii)

  • In both beakers, the cooling rate decreases as the water cools: each successive temperature drop becomes smaller.

1(e)(i)

  • Use $x_A = (\theta_0 - \theta_{180})/T$.
  • $x_A = (85.0\,^{\circ}\mathrm{C} - 56.5\,^{\circ}\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.158}\,^{\circ}\mathrm{C/s}$.

1(e)(ii)

  • Use $x_B = (\theta_0 - \theta_{180})/T$.
  • $x_B = (86.0\,^{\circ}\mathrm{C} - 76.0\,^{\circ}\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.0556}\,^{\circ}\mathrm{C/s}$.

1(e)(iii)

  • The results support the suggestion.
  • With the lid, $x_B = 0.0556\,^{\circ}\mathrm{C/s}$ is less than half of $x_A = 0.158\,^{\circ}\mathrm{C/s}$. Covering the surface greatly reduces the cooling rate.

1(f)

  • Use a thicker, better-insulated lid, so less energy is transferred through the lid.
Original question

Log in or create account

IGCSE, A-Level & AP