Some students investigate an electrical circuit containing different combinations of resistors.
They use circuit A shown in Fig. 2.1. Circuit A is not shown complete.

circuit A
Fig. 2.1
On Fig. 2.1, complete circuit A to show a voltmeter connected to measure the potential difference (p.d.) across resistor X and an ammeter connected to measure the current in the circuit.[2]
A student measures the potential difference $V$ across resistor X and the current $I$ in the circuit. The voltmeter reading is shown in Fig. 2.2. The ammeter reading is shown in Fig. 2.3.


Record, in the first line of Table 2.1, the values of $V$ and $I$ shown on the meters in Fig. 2.2 and Fig. 2.3.[1]
Table 2.1
| circuit | $V/$ | $I/$ | $R / \Omega$ |
| A | |||
| B | 2.1 | 0.54 | |
| C | 1.6 | 0.39 |
The student now connects two $5\,\Omega$ resistors in series between P and Q, as shown in Fig. 2.4, to form circuit B. The rest of the circuit remains as in Fig. 2.1.

She measures the potential difference (p.d.) $V$ across resistor X and the current $I$ in the circuit.
The student then connects three $5\,\Omega$ resistors in series between P and Q, as shown in Fig. 2.5, to form circuit C. The rest of the circuit remains as in Fig. 2.1.

She measures the potential difference (p.d.) $V$ across resistor X and the current $I$ in the circuit.
All her readings are shown in Table 2.1.
Complete the headings in Table 2.1.[1]
Calculate, and record in Table 2.1, a value for the resistance $R$ of resistor X for each combination of resistors the student has used.
Use the readings from Table 2.1 and the equation $R = \frac{V}{I}$.[2]
A student suggests that the values of $R$ should be the same. State whether your results support this suggestion. Justify your statement by reference to values from your results.
statement
justification [2]
The results can be checked by using a different circuit.
Draw, on Fig. 2.6, one other arrangement of three $5\,\Omega$ resistors between terminals P and Q.

[1]
A student wants to determine $R$ by using a variable resistor to vary the current in the circuit. Draw the circuit symbol for a variable resistor.[1]
Explain one advantage of using a variable resistor to vary the current compared to the procedure carried out in (b) and (c).[1]
[Total: 11]