Skip to content

IGCSE Physics · November 2020 · Paper 61 · Difficulty 2 · Core

Question 2

2

A student investigates the cooling of water under different conditions.

Fig. 2.1 shows the apparatus she uses.

(a)

The thermometer in Fig. 2.2 shows the room temperature $\theta_R$ at the beginning of the experiment. Record $\theta_R$.

$\theta_R$ = °C[1]

(b)

The student pours 200 cm$^3$ of hot water into the beaker.

She records the temperature $\theta$ of the hot water at time $t = 0$. She immediately starts a stopclock.

After 180 s, she measures the temperature $\theta$ shown on the thermometer. Her temperature readings are shown in Table 2.1.

$t$ /$\theta_1$ /
85
69
(i)

Complete the time column and the column headings in Table 2.1.[1]

(ii)

Calculate the drop in temperature $\Delta\theta_1$ between times $t = 0$ and $t = 180$ s.

$\Delta\theta_1$ = °C[1]

(iii)

Calculate the average rate of cooling $R_1$ of the water using the equation $R_1 = \frac{\Delta\theta_1}{\Delta t}$, where $\Delta t = 180$ s. Include the unit.

$R_1$ = [1]

(c)

The student empties the beaker. She pours 150 cm$^3$ of hot water into the beaker. She adds 50 cm$^3$ of cold water to the beaker. She repeats the timing and temperature recording procedure described in (b). The temperature readings are shown in Table 2.2.

$t$ /$\theta_2$ /
69
57
(i)

Complete the time column and the column headings in Table 2.2.[1]

(ii)

Calculate the drop in temperature $\Delta\theta_2$ between times $t = 0$ and $t = 180$ s.

$\Delta\theta_2$ = °C

Calculate the average rate of cooling $R_2$ of the water using the equation $R_2 = \frac{\Delta\theta_2}{\Delta t}$, where $\Delta t = 180$ s. Include the unit.

$R_2$ = [1]

(d)

A student suggests that the average rate of cooling $R$ of the water depends on the difference $D$ between the temperature of the water at time $t = 0$ and room temperature.

(i)

Calculate the difference $D_1$ using the readings in Table 2.1 and your answer to (a).

$D_1$ = °C

Calculate the difference $D_2$ using the readings in Table 2.2 and your answer to (a).

$D_2$ = °C[1]

(ii)

Write a conclusion about the relationship between $R$ and $D$. Justify your answer by reference to your results.

conclusion

justification [2]

(e)
(i)

Explain why the thermometer scale should be read at right-angles.

[1]

(ii)

Explain why the mixture of hot and cold water should be stirred before taking the temperature reading at the start of the experiment in (c).

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Read the thermometer at the top of the liquid: $\theta_R = \mathbf{21}\,^{\circ}\mathrm{C}$.

2(b)(i)

  • Label the columns $t/\mathrm{s}$ and $\theta_1/\,^{\circ}\mathrm{C}$. Enter $\mathbf{0}$ and $\mathbf{180}$ for the times.

2(b)(ii)

  • Use $\Delta\theta_1 = \theta_{\mathrm{initial}} - \theta_{\mathrm{final}}$.
  • $\Delta\theta_1 = 85\,^{\circ}\mathrm{C} - 69\,^{\circ}\mathrm{C} = \mathbf{16}\,^{\circ}\mathrm{C}$.

2(b)(iii)

  • Use $R_1 = \Delta\theta_1/\Delta t$.
  • $R_1 = (16\,^{\circ}\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.089}\,^{\circ}\mathrm{C/s}$.

2(c)(i)

  • Label the columns $t/\mathrm{s}$ and $\theta_2/\,^{\circ}\mathrm{C}$. Enter $\mathbf{0}$ and $\mathbf{180}$ for the times.

2(c)(ii)

  • Use $\Delta\theta_2 = \theta_{\mathrm{initial}} - \theta_{\mathrm{final}}$ and $R_2 = \Delta\theta_2/\Delta t$.
  • $\Delta\theta_2 = 69\,^{\circ}\mathrm{C} - 57\,^{\circ}\mathrm{C} = \mathbf{12}\,^{\circ}\mathrm{C}$.
  • $R_2 = (12\,^{\circ}\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.067}\,^{\circ}\mathrm{C/s}$.

2(d)(i)

  • Use $D = \theta_{\mathrm{initial}} - \theta_R$.
  • $D_1 = 85\,^{\circ}\mathrm{C} - 21\,^{\circ}\mathrm{C} = \mathbf{64}\,^{\circ}\mathrm{C}$.
  • $D_2 = 69\,^{\circ}\mathrm{C} - 21\,^{\circ}\mathrm{C} = \mathbf{48}\,^{\circ}\mathrm{C}$.

2(d)(ii)

  • The average cooling rate increases as the temperature difference increases.
  • When $D$ increases from $48\,^{\circ}\mathrm{C}$ to $64\,^{\circ}\mathrm{C}$, $R$ increases from $0.067\,^{\circ}\mathrm{C/s}$ to $0.089\,^{\circ}\mathrm{C/s}$.

2(e)(i)

  • Reading at right angles prevents parallax error, which would change the apparent position of the liquid on the scale.

2(e)(ii)

  • Stirring makes the temperature even throughout the water, so the reading represents the mixture.
Original question

Log in or create account

IGCSE, A-Level & AP