Skip to content

IGCSE Physics · November 2020 · Paper 61 · Difficulty 3 · Standard

Question 1

1

A student determines the density of modelling clay by two methods.

Method 1

(a)

Fig. 1.1 shows one face of a piece of modelling clay that the student uses. This is sample A.

The student measures the depth $d$ of sample A.

$d = 3.2$ cm

(i)

Measure and record the length $l$ and the width $w$ of the sample A of modelling clay. Fig. 1.1 is drawn actual size.

$l = ..........................................................$ cm

$w = ..........................................................$ cm[1]

(ii)

Calculate the volume $V_A$ of sample A using the equation $V_A = l \times w \times d$.

$V_A = ...................................................$ cm$^3$[1]

(iii)

Fig. 1.2 shows sample A on a balance. Record the mass $m_A$ of sample A to the nearest g.

$m_A = ......................................................$ g[1]

(iv)

Calculate the density $\rho_A$ of sample A of modelling clay using the equation $\rho_A = \frac{m_A}{V_A}$.

Give your answer to a suitable number of significant figures for this method and include the unit.

$\rho_A = .........................................................$[2]

Method 2

(b)

The student records the volume $V_1$ of water in a measuring cylinder.

$V_1 = 150$ cm$^3$

He carefully lowers sample B of the same modelling clay into the measuring cylinder until it is completely covered with water.

He records the new reading $V_2$ of the water level in the measuring cylinder.

$V_2 = 182$ cm$^3$

(i)

Calculate the volume $V_B$ of sample B using the equation $V_B = V_2 - V_1$.

$V_B = ..................................................$ cm$^3$[1]

(ii)

The student measures the mass $m_B$ of sample B.

$m_B = 60$ g

Calculate the density $\rho_B$ of sample B using the equation $\rho_B = \frac{m_B}{V_B}$. Give your answer to a suitable number of significant figures for this method and include the unit.

$\rho_B = .........................................................$[1]

(c)

A student suggests that the density of modelling clay is not affected by the mass or the volume of the sample used.

State whether your results agree with the suggestion. Justify your answer by reference to your results.

statement

justification

[2]

(d)

Tick the boxes that describe the correct line of sight for taking a reading of the volume of water in a measuring cylinder. Fig. 1.3 shows the curved surface of water, which is called the meniscus.

along the scale

parallel to the scale

perpendicular to the scale

vertical to the scale

in line with the bottom of the meniscus

in line with the top of the meniscus

in line with midway between the top and bottom of the meniscus.[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Measure along the two labelled sides: $l = \mathbf{3.1}\,\mathrm{cm}$ and $w = \mathbf{2.7}\,\mathrm{cm}$.

1(a)(ii)

  • Use $V_A = lwd$.
  • $V_A = (3.1\,\mathrm{cm})(2.7\,\mathrm{cm})(3.2\,\mathrm{cm}) = \mathbf{27}\,\mathrm{cm^3}$.

1(a)(iii)

  • Read the balance to the nearest gram: $m_A = \mathbf{51}\,\mathrm{g}$.

1(a)(iv)

  • Use $\rho_A = m_A/V_A$.
  • $\rho_A = (51\,\mathrm{g})/(26.784\,\mathrm{cm^3}) = \mathbf{1.9}\,\mathrm{g/cm^3}$, to two significant figures.

1(b)(i)

  • Use $V_B = V_2 - V_1$ to find the volume displaced.
  • $V_B = 182\,\mathrm{cm^3} - 150\,\mathrm{cm^3} = \mathbf{32}\,\mathrm{cm^3}$.

1(b)(ii)

  • Use $\rho_B = m_B/V_B$.
  • $\rho_B = (60\,\mathrm{g})/(32\,\mathrm{cm^3}) = \mathbf{1.88}\,\mathrm{g/cm^3}$.

1(c)

  • The results agree with the suggestion.
  • The densities, $1.9\,\mathrm{g/cm^3}$ and $1.88\,\mathrm{g/cm^3}$, are close enough to agree within experimental uncertainty.

1(d)

  • Look perpendicular to the scale, with your eye in line with the bottom of the meniscus. This avoids parallax error.
Original question

Log in or create account

IGCSE, A-Level & AP