Skip to content

IGCSE Physics · June 2023 · Paper 63 · Difficulty 3 · Standard

Question 2

2

A student investigates a circuit containing different combinations of resistors.

She uses circuit A, shown in Fig. 2.1. Circuit A is not yet complete.

(a)

On Fig. 2.1, complete the circuit to show a voltmeter connected to measure the potential difference (p.d.) across resistor U.[1]

(b)

Circuit A

The student measures the potential difference (p.d.) $V$ across resistor U and the current $I$ in the circuit.

Read, and record in Table 2.1, the values of $V$ and $I$ shown on the meters in Fig. 2.2 and Fig. 2.3.

Table 2.1

circuit$V/\text{V}$$I/\text{A}$$R/\Omega$
A
B2.10.54
C2.40.63

[2]

(c)

Circuit B

Circuit C

The student connects two $3\,\Omega$ resistors in parallel between P and Q as shown in Fig. 2.4 to form circuit B.

The student connects three $3\,\Omega$ resistors in parallel as shown in Fig. 2.5 to form circuit C.

For each circuit, she measures the potential difference (p.d.) $V$ across resistor U and the current $I$ in the circuit. Her readings are shown in Table 2.1.

(i)

Calculate, and record in Table 2.1, the resistance $R$ of resistor U for each combination of resistors.

Use the readings from Table 2.1 and the equation $R = \frac{V}{I}$.[2]

(ii)

A student suggests that the values of $R$ should be the same.

State whether your results support this suggestion. Justify your statement by reference to values from your results.

statement

justification [2]

(d)

A student determines the resistance of resistor U using a variable resistor to control the current in the circuit.

(i)

Complete the circuit in Fig. 2.6 to show a variable resistor used for this purpose.

[2]

(ii)

Briefly explain one advantage of using a variable resistor to determine the resistance of resistor U rather than the procedure carried out in (b) and (c).[1]

(e)

A student suggests that potential difference and current for resistor U are proportional.

State how a graph of potential difference against current for resistor U can confirm this suggestion.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Connect a voltmeter in parallel with resistor U, with one lead at each end of U.

2(b)

  • Read the voltmeter scale: $V = \mathbf{1.7}\,\mathrm{V}$.
  • Read the ammeter scale: $I = \mathbf{0.42}\,\mathrm{A}$.

2(c)(i)

  • Use $R = \dfrac{V}{I}$ for each circuit.
  • For A, $R = \dfrac{1.7\,\mathrm{V}}{0.42\,\mathrm{A}} = \mathbf{4.05}\,\mathrm{\Omega}$.
  • For B, $R = \dfrac{2.1\,\mathrm{V}}{0.54\,\mathrm{A}} = \mathbf{3.89}\,\mathrm{\Omega}$.
  • For C, $R = \dfrac{2.4\,\mathrm{V}}{0.63\,\mathrm{A}} = \mathbf{3.81}\,\mathrm{\Omega}$.

2(c)(ii)

  • Yes, the values are close: they range from $3.81\,\mathrm{\Omega}$ to $4.05\,\mathrm{\Omega}$.
  • The small differences could be due to uncertainty in the meter readings.

2(d)(i)

  • Draw the variable resistor symbol: a resistor rectangle with an arrow across it.
  • Connect it in series with U and the ammeter so it controls the circuit current.

2(d)(ii)

  • A variable resistor makes it easy to change the current and obtain many readings.

2(e)

  • The suggestion is supported if the graph is a straight line through the origin.
Original question

Log in or create account

IGCSE, A-Level & AP