Skip to content

IGCSE Physics · June 2023 · Paper 63 · Difficulty 4 · Challenging

Question 3

3

A student investigates the reflection of light by two plane mirrors.

The student’s ray-trace sheet is shown full-size in Fig. 3.1.

Fig. 3.1
(a)

The student places two mirrors, FE and FG, at an angle of 100° to each other, as shown in Fig. 3.1.

(i)

On Fig. 3.1, draw a normal to FG at point N. Extend the normal below FG. Label the lower end of the normal with the letter L.[1]

(ii)

The student draws line AN, as shown in Fig. 3.1.

On Fig. 3.1, measure the acute angle $\theta_1$ between the lines AN and GN. (An acute angle is less than 90°.)

$\theta_1$ = °[1]

(b)

The student places two pins, $P_1$ and $P_2$, on line AN, as shown in Fig. 3.1.

(i)

Measure the distance $d$ between pins $P_1$ and $P_2$.

$d$ = cm[1]

(ii)

Suggest whether the two pins are a suitable distance apart for accurate ray tracing. Explain your answer.

statement

explanation

[1]

(c)

The student views the images of $P_1$ and $P_2$ in mirror FE.

She places two pins, $P_3$ and $P_4$, so that pins $P_3$, $P_4$ and the images of $P_1$ and $P_2$ all appear one behind the other.

  • Draw a line through $P_3$ and $P_4$. Extend the line 10cm above FE.
  • Label the upper end of this line with the letter R.
  • Label the lower end of the line with the letter B. [1]

(d)

The student repeats the procedure for an angle $\theta_2 = 40°$.

She places two pins, $P_5$ and $P_6$, so that pins $P_5$, $P_6$ and the images of $P_1$ and $P_2$ all appear one behind the other.

  • Draw a line through pins $P_5$ and $P_6$. Extend the line until it crosses BR.
  • Label the upper end of this line with the letter T.
  • Label the lower end of the line with the letter C.
(i)

Measure the acute angle $\alpha$ between lines BR and CT. (An acute angle is less than 90°.)

$\alpha$ = °[1]

(ii)

A student thinks that there is a relationship between angle $\alpha$ and the values of angle $\theta_1$ from (a)(ii) and angle $\theta_2$ from (d).

State what your results suggest that relationship could be. Justify your answer by reference to values from your results.

statement

justification

[2]

(e)

Suggest two precautions to take in this type of experiment to ensure accurate results.

1

2

[2]

(f)

Suggest one reason why different students, all doing this experiment carefully, may not obtain identical results.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • Draw a line through N at $90°$ to FG. Extend it below FG and label the lower end L.

3(a)(ii)

  • Measure the acute angle from AN to GN with a protractor: $\theta_1 \approx \mathbf{15}°$.

3(b)(i)

  • Measure from the centre of P1 to the centre of P2: $d = \mathbf{3.5}\,\mathrm{cm}$.

3(b)(ii)

  • No. The pins are too close together; placing them further apart makes alignment more accurate.

3(c)

  • Draw a thin straight line through P3 and P4 and extend it $10\,\mathrm{cm}$ above FE. Label its upper end R and lower end B.

3(d)(i)

  • Draw CT through P5 and P6 until it crosses BR. Measure the acute angle between the lines: $\alpha \approx \mathbf{27}°$.

3(d)(ii)

  • The results suggest $\alpha \approx \theta_2 - \theta_1$.
  • Here $\theta_2 - \theta_1 \approx 40° - 15° = 25°$, close to the measured $\alpha$ of about $27°$.

3(e)

  • Use a sharp pencil to draw thin lines, so their positions are clear.
  • Place the pins far apart to make it easier to align them accurately.

3(f)

  • It is difficult to align the pins exactly, so careful students can still obtain slightly different results.
Original question

Log in or create account

IGCSE, A-Level & AP