A student determines the mass $M_{\text{R}}$ of a metre ruler by a balancing method.
He uses the apparatus shown in Fig. 1.1.

The student places a circular load of mass $M = 20\text{ g}$ on the metre ruler but in a position different from that shown in Fig. 1.1.

Determine the distance $d_0$ of the centre of the load from the zero end of the ruler, as shown in Fig. 1.2. Fig. 1.2 is not to scale.
$d_0 =$ $\text{cm}$[1]
The student places the metre ruler on the pivot and changes the position of the load so that the centre of the load is at the $5.0\text{ cm}$ mark.
He adjusts the position of the metre ruler on the pivot until the metre ruler is as near as possible to being balanced.
Describe a technique for ensuring that the ruler is as near as possible to being balanced.
[1]
The student determines the scale reading $p$ on the ruler at the position of the pivot.
He calculates the distance $a$ between the $5.0\text{ cm}$ mark and the pivot and the distance $b$ between the $50.0\text{ cm}$ mark and the pivot, using the equations
He repeats the procedure for values of $M = 40\text{ g}$, $60\text{ g}$, $80\text{ g}$ and $100\text{ g}$.
His results are shown in Table 1.1.
Table 1.1
| $M / \text{g}$ | $a / \text{cm}$ | $b / \text{cm}$ | $\frac{b}{a}$ |
| 20 | 39.5 | 5.5 | |
| 40 | 35.7 | 9.3 | 0.26 |
| 60 | 32.6 | 12.4 | 0.38 |
| 80 | 29.0 | 16.0 | 0.55 |
| 100 | 27.0 | 18.0 | 0.67 |
For the value of $M = 20\text{ g}$, calculate and record in Table 1.1 the value of $\frac{b}{a}$.[1]
Plot a graph of $M / \text{g}$ ($y$-axis) against $\frac{b}{a}$ ($x$-axis).
Draw the best-fit line.

[4]
Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.
$G =$ [1]
The mass $M_{\text{R}}$ of the metre ruler is numerically equal to $G$.
Write down the value of $M_{\text{R}}$ in this experiment. Include the unit.
$M_{\text{R}} =$ [1]
The determination of $M_{\text{R}}$ by this method assumes that the centre of mass of the metre ruler is at the $50.0\text{ cm}$ mark.
Suggest how you could use apparatus from Fig. 1.1 to test whether the centre of mass of the metre ruler is at the $50.0\text{ cm}$ mark. You may draw a diagram.
[1]
A student finds that the centre of mass of her metre ruler is at the $48.7\text{ cm}$ mark.
Suggest how she changes the procedure in (b)(ii) to allow for this.
[1]
[Total: 11]