Skip to content

IGCSE Physics · June 2020 · Paper 52 · Difficulty 2 · Core

Question 3

3

In this experiment, you will investigate some thermal properties of sand and water.

Carry out the following instructions referring to Fig. 3.1.

Fig. 3.1
(a)

Use the thermometer to measure room temperature $\theta_S$.

$\theta_S$ =

Use the thermometer to measure the temperature $\theta_H$ of the hot water in beaker B.

$\theta_H$ = [1]

(b)

Beaker A contains sand. Pour 100 cm$^{3}$ of hot water from beaker B into beaker A. Carefully stir the water and sand mixture.

Record the highest temperature $\theta_M$ of the mixture.

$\theta_M$ = [1]

(c)
(i)

Calculate the rise in temperature $\theta_R$ of the sand using the equation $\theta_R = (\theta_M - \theta_S)$.

$\theta_R$ =

Calculate the fall in temperature $\theta_F$ of the hot water using the equation $\theta_F = (\theta_H - \theta_M)$.

$\theta_F$ = [1]

(ii)

Calculate the ratio $S$ using the equation $S = \frac{\theta_R}{\theta_F}$.

$S$ = [1]

(d)

Measure the new temperature $\theta_H$ of the hot water supplied.

$\theta_H$ = [1]

(e)

Beaker C contains water at room temperature. Pour 100 cm$^{3}$ of the hot water into beaker C. Carefully stir the water.

Record the highest temperature $\theta_M$ of the mixture.

$\theta_M$ = [1]

(f)

Calculate the rise in temperature $\theta_R$ of the cold water using the equation $\theta_R = (\theta_M - \theta_S)$. Use the value of room temperature $\theta_S$ recorded in (a) and the value of $\theta_M$ recorded in (e).

$\theta_R$ =

Calculate the fall in temperature $\theta_F$ of the hot water using the equation $\theta_F = (\theta_H - \theta_M)$. Use the value of $\theta_H$ from (d) and $\theta_M$ from (e).

$\theta_F$ =

Calculate the ratio $W$ using the equation $W = \frac{\theta_R}{\theta_F}$.

$W$ = [1]

(g)

A student studies the thermal properties of sand and water. He predicts that $S$ should be equal to $6 \times W$.

State whether your results support the prediction. Justify your answer by reference to your readings.

statement

justification

[2]

(h)

Suggest two temperatures that it would be sensible to keep constant when carrying out the experiments.

  1. [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Measure both temperatures. For example, room temperature could be $\theta_S = \mathbf{20}\,{}^{\circ}\mathrm{C}$ and hot water $\theta_H = \mathbf{80}\,{}^{\circ}\mathrm{C}$. Use your own readings.

3(b)

  • Stir and record the highest temperature. For example, $\theta_M = \mathbf{68}\,{}^{\circ}\mathrm{C}$; it should be between the starting temperatures.

3(c)(i)

  • Use $\theta_R = \theta_M - \theta_S$ and $\theta_F = \theta_H - \theta_M$.
  • For the example readings, $\theta_R = 68\,{}^{\circ}\mathrm{C} - 20\,{}^{\circ}\mathrm{C} = \mathbf{48}\,{}^{\circ}\mathrm{C}$ and $\theta_F = 80\,{}^{\circ}\mathrm{C} - 68\,{}^{\circ}\mathrm{C} = \mathbf{12}\,{}^{\circ}\mathrm{C}$.

3(c)(ii)

  • Use $S = \theta_R/\theta_F$.
  • For the example readings, $S = 48\,{}^{\circ}\mathrm{C}/12\,{}^{\circ}\mathrm{C} = \mathbf{4}$. The ratio has no unit.

3(d)

  • Measure the hot water again because it may have cooled. For example, $\theta_H = \mathbf{80}\,{}^{\circ}\mathrm{C}$; use your own reading.

3(e)

  • Stir and record the highest temperature. For example, $\theta_M = \mathbf{40}\,{}^{\circ}\mathrm{C}$; it should be between the starting temperatures.

3(f)

  • Use $\theta_R = \theta_M - \theta_S$ and $\theta_F = \theta_H - \theta_M$.
  • For the example readings, $\theta_R = 40\,{}^{\circ}\mathrm{C} - 20\,{}^{\circ}\mathrm{C} = \mathbf{20}\,{}^{\circ}\mathrm{C}$ and $\theta_F = 80\,{}^{\circ}\mathrm{C} - 40\,{}^{\circ}\mathrm{C} = \mathbf{40}\,{}^{\circ}\mathrm{C}$.
  • Use $W = \theta_R/\theta_F$: $W = 20\,{}^{\circ}\mathrm{C}/40\,{}^{\circ}\mathrm{C} = \mathbf{0.5}$. Use your own temperatures.

3(g)

  • Compare your value of $S$ with $6W$. For the example results, $S = 4$ and $6W = 6(0.5) = 3$, so they do not support the prediction.
  • Use your own values to decide whether they agree within experimental uncertainty.

3(h)

  • Keep the room temperature and the starting temperature of the hot water constant.
Original question

Log in or create account

IGCSE, A-Level & AP