Skip to content

IGCSE Physics · June 2020 · Paper 52 · Difficulty 4 · Challenging

Question 4

4

A student investigates the bending of 1 m length strips of different materials. She compares how far they bend when loaded at one end.

Plan an experiment to investigate how the material from which the strips are made affects the bending of the strips when loaded at one end.

You are not required to carry out this experiment.

The following apparatus is available to the student:

strips of wood, plastic, steel and aluminium, all 1 m long a set of slotted masses a metre rule a G-clamp (used to hold the strips to the laboratory bench).

Other apparatus normally available in a school laboratory can also be used.

In your plan, you should:

• draw a diagram to show the arrangement of the apparatus

• explain briefly how you would carry out the investigation, including the measurements you would take

• state the key variables to be kept constant

• draw a suitable table, with column headings, to show how you would display your readings (you are not required to enter any readings in the table)

• explain how you would use the results to reach a conclusion.[7]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Draw a strip clamped to the bench with most of it overhanging. Show a vertical metre rule at its free end. Record the height of the unloaded end.
  • Hang a load near the free end. Measure the fall in height from the unloaded position. Repeat for wood, plastic, steel and aluminium.
  • Keep the load, overhanging length, load position, strip width and thickness the same. Draw a table with headings: material, load / N and fall in height / cm.
  • Compare the falls in height for the same load. The material with the greatest fall in height is the one that bends most.
Original question

Log in or create account

IGCSE, A-Level & AP