Skip to content

IGCSE Physics · March 2025 · Paper 62 · Difficulty 4 · Challenging

Question 2

2

A student investigates the effect of insulation on the cooling of water.

He uses the apparatus shown in Fig. 2.1.

Beaker A is covered with material that is a thermal insulator.

Beaker B is identical to beaker A but has no insulation.

(a)
(i)

Record room temperature $\theta_R$ shown on the thermometer in Fig. 2.1.

$\theta_R$ = [1]

(ii)

Describe one technique used to ensure that the room temperature reading is as accurate as possible.

[1]

(b)

The student pours $200\text{cm}^3$ of hot water into beaker A and records the temperature $\theta$ at time $t = 0$.

He records, in Table 2.1, the temperature of the water in the beaker every $30\text{s}$.

The student repeats the procedure for beaker B.

It is important that the temperatures are recorded at exactly every $30\text{s}$.

Describe a technique which will make it easier for the student to do that.

[1]

beaker A with insulationbeaker B without insulation
$t /\text{s}$$\theta / ^\circ\text{C}$$\theta / ^\circ\text{C}$
092.593.0
3090.590.5
6089.088.5
9087.587.0
12086.085.5
15085.084.0
18085.583.0

Table 2.1

(c)

Write a conclusion stating whether the insulation affects the rate of cooling of the water. Justify your answer by referring to values from the results.

[2]

(d)
(i)

Calculate the average cooling rate $x_1$ during the first half of the experiment for the water in beaker B. Use the readings for beaker B from Table 2.1 and the equation:

$x_1 = \frac{\theta_0 - \theta_{90}}{T}$

where $T = 90\text{s}$ and $\theta_0$ and $\theta_{90}$ are the temperatures of the water in beaker B at times $t = 0$ and $t = 90\text{s}$.

Include the unit.

$x_1 =$ [1]

(ii)

Calculate the average cooling rate $x_2$ during the second half of the experiment for the water in beaker B. Use the readings for beaker B from Table 2.1 and the equation:

$x_2 = \frac{\theta_{90} - \theta_{180}}{T}$

where $T = 90\text{s}$ and $\theta_{90}$ and $\theta_{180}$ are the temperatures of the water in beaker B at $t = 90\text{s}$ and $t = 180\text{s}$.

Include the unit.

$x_2 =$ [1]

(e)

A student suggests that, for this type of experiment, the temperature of the water in each beaker at time $t = 0$ must be the same for the comparison to be fair.

Use your answers from (d)(i) and (d)(ii) to explain whether this is necessary.

[2]

(f)
(i)

A student wants to eliminate, from the comparison, any thermal energy lost from the surface of the water.

Suggest a change to the equipment which will do that.

[1]

(ii)

Suggest what effect this change will have on the cooling rates of the water in beaker A and beaker B.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • The thermometer reads $\mathbf{21}\,^\circ\mathrm{C}$.

2(a)(ii)

  • Read the thermometer at eye level, looking at right angles to the scale, to reduce parallax.

2(b)

  • Set a timer to signal every $30\,\mathrm{s}$ so the thermometer can be read at each signal.

2(c)

  • The insulated beaker A cools more slowly. Use temperature fall $\Delta\theta=\theta_0-\theta_{180}$.
  • Over $180\,\mathrm{s}$, A cools by $92.5\,^\circ\mathrm{C}-85.5\,^\circ\mathrm{C}=7.0\,^\circ\mathrm{C}$; B cools by $93.0\,^\circ\mathrm{C}-83.0\,^\circ\mathrm{C}=10.0\,^\circ\mathrm{C}$.

2(d)(i)

  • Use $x_1 = (\theta_0-\theta_{90})/T$.
  • $x_1 = (93.0\,^\circ\mathrm{C}-87.0\,^\circ\mathrm{C})/90\,\mathrm{s} = \mathbf{0.067}\,^\circ\mathrm{C/s}$.

2(d)(ii)

  • Use $x_2 = (\theta_{90}-\theta_{180})/T$.
  • $x_2 = (87.0\,^\circ\mathrm{C}-83.0\,^\circ\mathrm{C})/90\,\mathrm{s} = \mathbf{0.044}\,^\circ\mathrm{C/s}$.

2(e)

  • The first cooling rate is higher than the second, so the rate changes as the water cools.
  • Yes, both beakers must start at the same temperature so the comparison depends on insulation.

2(f)(i)

  • Put a lid on each beaker to reduce energy loss from the water surface.

2(f)(ii)

  • Both cooling rates decrease because less energy leaves from the water surfaces.
Original question

Log in or create account

IGCSE, A-Level & AP