Skip to content

IGCSE Physics · March 2023 · Paper 52 · Difficulty 2 · Core

Question 2

2

In this experiment, you will investigate the cooling of hot water from different initial temperatures.

Carry out the following instructions, referring to Fig. 2.1.

(a)

Experiment A Pour $100\text{ cm}^3$ of hot water into the beaker. Place the thermometer in the water in the beaker.

In the first row of Table 2.1, record the temperature $\theta_A$ of the water at time $t = 0\text{ s}$ and immediately start the stop-watch.

Record, in Table 2.1, the temperature $\theta_A$ of the water at times $t = 30\text{ s}$, $t = 60\text{ s}$, $t = 90\text{ s}$, $t = 120\text{ s}$, $t = 150\text{ s}$ and $t = 180\text{ s}$.[1]

Empty the beaker.

(b)

Experiment B Pour $100\text{ cm}^3$ of hot water into the beaker. Place the thermometer in the water in the beaker.

Wait until the temperature $\theta_B$ of the water has reached the same value as the temperature $\theta_A$ at $t = 90\text{ s}$ in Experiment A.

In the first row of Table 2.1, record this temperature $\theta_B$ of the water at time $t = 0\text{ s}$ and immediately start the stop-watch.

Record, in Table 2.1, the temperature $\theta_B$ of the water at times $t = 30\text{ s}$, $t = 60\text{ s}$, $t = 90\text{ s}$, $t = 120\text{ s}$, $t = 150\text{ s}$ and $t = 180\text{ s}$.

Table 2.1[3]

$t /\text{ s}$$\theta_A /\text{ }^\circ\text{C}$$\theta_B /\text{ }^\circ\text{C}$
0
30
60
90
120
150
180
(c)

Write a conclusion stating how the temperature at $t = 0\text{ s}$ affects the rate of cooling of the water.

Justify your answer by reference to values from your results.[2]

(d)
(i)

Calculate the average cooling rate $x_1$ during the second half of Experiment A. Use your readings from Table 2.1 and the equation

$$x_1 = \frac{\theta_{A90} - \theta_{A180}}{T}$$

where $T = 90\text{ s}$ and $\theta_{A90}$ and $\theta_{A180}$ are the temperatures at $t = 90\text{ s}$ and $t = 180\text{ s}$ in Experiment A.

Include the unit for the cooling rate.

$x_1 =$ [2]

(ii)

Calculate the average cooling rate $x_2$ during the first half of Experiment B. Use the readings from Table 2.1 and the equation

$$x_2 = \frac{\theta_{B0} - \theta_{B90}}{T}$$

where $T = 90\text{ s}$ and $\theta_{B0}$ and $\theta_{B90}$ are the temperatures at $t = 0\text{ s}$ and $t = 90\text{ s}$ in Experiment B.

$x_2 =$ [1]

(iii)

A student suggests that $x_1$ and $x_2$ should be the same.

State whether your results support this suggestion.

Justify your statement by reference to your results.

statement

justification

[1]

(e)

State one variable which must be controlled so that the comparison of $x_1$ and $x_2$ is valid.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Record your thermometer readings at each time to at least the nearest $1\,{}^\circ\mathrm{C}$. The readings should decrease as the water cools.

2(b)

  • Start B when its temperature is the same as A at $90\,\mathrm{s}$, and record this as the B reading at $0\,\mathrm{s}$.
  • Record the B temperatures at each time to at least the nearest $1\,{}^\circ\mathrm{C}$. They should decrease, usually more slowly than in A because B starts cooler.

2(c)

  • A higher starting temperature gives a faster cooling rate if A has the larger temperature drop over $180\,\mathrm{s}$.
  • Use your table to compare both drops over $180\,\mathrm{s}$. For example, a drop of $15\,{}^\circ\mathrm{C}$ in A and $12\,{}^\circ\mathrm{C}$ in B supports this conclusion.

2(d)(i)

  • Use $x_1 = (\theta_{A90} - \theta_{A180})/T$, where $T = 90\,\mathrm{s}$.
  • For example, if $\theta_{A90} = 71\,{}^\circ\mathrm{C}$ and $\theta_{A180} = 65\,{}^\circ\mathrm{C}$, then $x_1 = (71-65)\,{}^\circ\mathrm{C}/(90\,\mathrm{s}) = \mathbf{0.067}\,{}^\circ\mathrm{C/s}$.

2(d)(ii)

  • Use $x_2 = (\theta_{B0} - \theta_{B90})/T$, where $T = 90\,\mathrm{s}$.
  • For example, if $\theta_{B0} = 71\,{}^\circ\mathrm{C}$ and $\theta_{B90} = 65\,{}^\circ\mathrm{C}$, then $x_2 = (71-65)\,{}^\circ\mathrm{C}/(90\,\mathrm{s}) = \mathbf{0.067}\,{}^\circ\mathrm{C/s}$.

2(d)(iii)

  • Compare your values of $x_1$ and $x_2$. If they are close enough for the difference to be explained by measurement uncertainty, the results support the suggestion; quote both values.
  • If the difference is larger than the likely measurement uncertainty, the results do not support it. Use your own readings to decide.

2(e)

  • Keep the volume of water the same, so it is a fair comparison.
Original question

Log in or create account

IGCSE, A-Level & AP