Energy Profiles for Many Steps
مُقدَّم| English | المعنى |
|---|---|
| intermediate/ˌɪntəˈmiːdɪət/ | وسيط |
A mountain range, not a single hill
- Most real reactions happen in several steps, like a mountain walk over a ridge of peaks. The step with the hardest climb, not the highest point on the map, slows the walk most.
- A multi-step energy profile shows one peak per step, with an intermediate 中间体 resting in each valley.
One hump per step
- A multi-step reaction shows one peak for each elementary step. Between the peaks lie small valleys.
- More steps means more humps.
A three-step reaction shows how many peaks on its energy profile?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
One peak per elementary step, so three peaks.
Intermediates rest in the dips
- Each valley between two peaks holds an intermediate 中间体. It is more stable than the peaks around it, but not the final product.
- It is briefly formed, then consumed by the next step.
An intermediate appears on the profile as a...
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Intermediates rest in the dips between peaks.
The largest local barrier rules
- Measure each activation energy from the start of that step (its own valley) up to its peak. The step with the largest local barrier is usually the slow, rate-determining step.
- A lower peak on the page can still have the larger barrier, if its valley is deep.
Under the simplified barrier comparison, which step is expected to be slower?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Compare transition state minus the starting state for each step. Absolute peak height is insufficient.
The rate-determining step is always the first step.
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Compare each local forward barrier. Neither first position nor highest absolute peak automatically identifies the slow step.
A two-step diagram has reactants at 20, peaks at 80 and 60, an intermediate at −20 and products at 0 (all in kJ/mol).
- Step 1: $E_{a,1}=80-20=60$. Step 2: $E_{a,2}=60-(-20)=80$ kJ/mol.
- The lower second peak has the larger local barrier, so step 2 is slower under the simplified barrier comparison.
Read a two-hump energy profile
Identify each feature on the energy profile of a two-step reaction.
Transition states are in the valleys of an energy profile, and intermediates are at the peaks.
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
False. It is the other way round: transition states are at the peaks and intermediates sit in the valleys between them.
The overall $\Delta H$ depends only on the reactant and product energies, not the peaks.
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
$\Delta H$ is products minus reactants, ignoring the barriers.
Using the profile values, calculate the second forward activation energy in kJ per mole.
الصعوبة 2/5 · 140 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Measure from the intermediate at −20 to the second transition state at 60: 60−(−20)=80.
Three steps. Reactants 0, peak +90, valley +40, peak +55, valley −10, peak +20, products −30 (all kJ/mol).
- Barriers: step 1 = 90 − 0 = 90; step 2 = 55 − 40 = 15; step 3 = 20 − (−10) = 30. Step 1 is rate-determining.
- Two valleys = two intermediates; three peaks = three transition states. ΔH = −30 − 0 = −30 kJ/mol, exothermic.
From reactants at 20 to products at 0, calculate the overall enthalpy change in kJ per mole.
الصعوبة 2/5 · 140 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Products minus reactants: 0−20=−20. Peak heights do not enter this subtraction.
Reactants 10, peak 50, valley −30, peak 30, products −40 (kJ/mol). What is the largest local forward barrier, in kJ/mol?
الصعوبة 2/5 · 140 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Step 1: 50 − 10 = 40. Step 2: 30 − (−30) = 60. Step 2 has the larger barrier, though its peak is lower.
In the three-step example, how many intermediates are there?
الصعوبة 2/5 · 140 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
One intermediate sits in each valley between peaks: three peaks leave two valleys.
- Intermediates sit in valleys; transition states sit at peaks.
- Measure each barrier from its own starting valley, never from zero or from the reactants.
- ΔH is products minus reactants only; the humps in between do not change it.
A multi-step energy profile has one peak per step and an intermediate resting in each valley between them. Compare local activation barriers, measured from each step's starting state; a lower absolute peak may have a larger barrier. The overall $\Delta H$ is still just the difference between the two ends.