| English | 释义 | 拼音 |
|---|---|---|
| heat of fusion/hiːt ɒv ˈfjuːʒn/ | 熔化热 | róng huà rè |
| heat of vaporization/hiːt ɒv ˌveɪpəraɪˈzeɪʃn/ | 汽化热 | qì huà rè |
The flat spots on the graph
- Heat ice steadily and its temperature climbs — then stalls at $0\ ^\circ\text{C}$ at atmospheric pressure.
- All the heat goes into melting, not warming.
- Only once it is fully liquid does the temperature rise again.
- Those flat spots hide a big energy cost.
Temperature pauses
- For a pure substance at fixed pressure, temperature stays constant while both phases coexist in equilibrium.
- During melting or boiling, added heat overcomes attractions rather than increasing average kinetic energy.
- So a heating curve has flat plateaus.

Heating curve: the temperature stays flat while a phase changes
A pure substance at fixed pressure stays at constant temperature while melting with solid and liquid both present.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Energy overcomes some attractions while both phases coexist, rather than increasing average kinetic energy.
On a heating curve, a phase change appears as a flat ____.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The temperature is constant, giving a flat plateau.
The hidden heats
- The heat of fusion 熔化热 is the energy to melt a solid.
- The heat of vaporization 汽化热 is the energy to boil a liquid.
- For equal amounts of water, vaporization takes far more energy than fusion.
For water, which usually requires more energy?
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
The heat of vaporization is much larger than the heat of fusion.
Warming versus changing
- Warming within one phase uses $q = mc\Delta T$.
- Changing phase uses $q=mL$ for latent heat per gram, or $q=n\Delta H_{phase}$ for molar data.
- A full heating curve combines both.
The heating curve
For a pure substance at fixed pressure, temperature stays flat while both phases coexist; latent heat overcomes particle attractions.
To warm a liquid without changing its phase, you use...
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Within a single phase, use $q = mc\Delta T$.
Why does steam burn worse than boiling water at the same temperature?
- Steam releases its large heat of vaporization as it condenses on skin.
- That extra energy makes the burn much worse.
Steam burns worse than boiling water because it also releases its...
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
Condensing steam gives up a large heat of vaporization to the skin.
You should use $q = mc\Delta T$ during a phase change.
难度 1/5 · 今日首次完成可获 100 金币及少量额外奖励
With $\Delta T = 0$, use the latent heat instead.
For a pure substance at fixed pressure with both phases present, temperature is constant — heat changes particle attractions, so do not use $q = mc\Delta T$ there ($\Delta T = 0$). Use the latent heat instead. For equal amounts of water, vaporization needs much more energy than fusion. And the plateaus on a heating curve mark the phase changes.
For a pure substance at fixed pressure, temperature holds constant while two phases coexist and energy changes particle attractions — the plateaus on a heating curve. The heat of fusion melts a solid and the heat of vaporization boils a liquid (much larger). Warming within a phase uses $q = mc\Delta T$; changing phase uses the latent heat.