The Haber and Contact processes
แนะนำใหม่| English | ความหมาย |
|---|---|
| yield/jiːld/ | ผลผลิต |
| Haber process/ˈheɪbə ˈprəʊses/ | กระบวนการฮาเบอร์ |
| ammonia/æˈməʊnɪə/ | แอมโมเนีย |
| catalyst/ˈkætəlɪst/ | ตัวเร่งปฏิกิริยา |
| compromise/ˈkɒmprəmaɪz/ | ทางสายกลาง |
| Contact process/ˈkɒntækt ˈprəʊses/ | กระบวนการคอนแทค |
Equilibrium that feeds the world
- About half the nitrogen in your body passed through a Haber process factory, as fertiliser. Industry runs reversible reactions on a huge scale.
- The chosen conditions balance three things: yield 产率, rate and cost.
The Haber process combines nitrogen and hydrogen to make ______.
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
N₂ + 3H₂ ⇌ 2NH₃.
The Haber process 哈伯法
- Makes ammonia 氨: $\text{N}_2(\text{g})+3\text{H}_2(\text{g})\rightleftharpoons2\text{NH}_3(\text{g})$, $\Delta H=-92$ kJ/mol.
- Conditions: about 450 °C, 200 atm, an iron catalyst 催化剂. Unreacted gases are recycled.

The Haber & Contact processes
การประนีประนอม: ผลผลิต vs ความเร็ว
High pressure boosts yield; high temperature speeds it up but lowers yield — a compromise.
The Haber process makes:
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
The Haber process makes ammonia: N₂ + 3H₂ ⇌ 2NH₃ (exothermic).
Why is a moderate temperature (~450 °C) used in the Haber process?
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
The reaction is exothermic, so low temperature favours yield but is too slow; ~450 °C balances yield and rate.
High pressure increases the yield of ammonia in the Haber process because:
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
4 gas molecules become 2, so higher pressure shifts the equilibrium towards ammonia.
Why those conditions?
| Condition | Effect on yield | Effect on rate | Cost and safety |
|---|---|---|---|
| low temperature | higher (exothermic) | too slow | — |
| high temperature | lower | faster | more fuel |
| high pressure | higher (4 → 2 gas molecules) | faster | strong pipes, compressors, risk |
| iron catalyst | no change | faster | cheap, reusable |
- 450 °C is a compromise 折中: a reasonable yield at a reasonable rate. 200 atm is high enough to help the yield without huge costs.
Which change increases the rate of the Haber process but has no effect on the equilibrium yield?
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
A catalyst speeds up both directions equally. Pressure, temperature and removing product all move the position.
The Contact process 接触法
- Makes SO₃ for sulfuric acid: $2\text{SO}_2(\text{g})+\text{O}_2(\text{g})\rightleftharpoons2\text{SO}_3(\text{g})$, $\Delta H=-197$ kJ/mol. About 450 °C, 1–2 atm, vanadium(V) oxide V₂O₅ catalyst.
- The SO₃ is absorbed in concentrated sulfuric acid to make oleum, H₂S₂O₇, which is then diluted with water. Adding SO₃ straight to water makes a corrosive mist.

The Contact process uses which catalyst?
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
The Contact process (2SO₂ + O₂ ⇌ 2SO₃) uses a vanadium(V) oxide catalyst.
Match each process to its facts.
ความยาก 2/5 · 140 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
Each item links the term to its correct meaning.
In the Contact process, what happens to the equilibrium yield of SO₃ if the temperature is raised?
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
Raising the temperature favours the endothermic (reverse) direction, so less SO₃ at equilibrium. The rate does increase, which is a separate effect.
Why does the Haber process use 200 atm, but the Contact process only 1–2 atm, when both reactions make fewer gas molecules?
- Haber: $4 \rightarrow 2$ gas molecules, and the conversion is only about 15% per pass, so high pressure is worth its cost. The unreacted $\text{N}_2$ and $\text{H}_2$ are recycled, so overall almost all is converted.
- Contact: at 450 °C and 1–2 atm the conversion is already about 99%. Higher pressure would add little yield but cost a lot more in compressors and thick-walled pipes.
Why is the Contact process run at only 1–2 atm?
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
High pressure would favour $\text{SO}_3$ (3 gas molecules to 2), but about 99% conversion is reached anyway, so it is not economic.
In the Haber process most of the nitrogen and hydrogen is converted on its first pass over the catalyst.
ความยาก 1/5 · 100 เหรียญ + บอนัสน้อยๆ เมื่อทำสำเร็จครั้งแรกในวันนี้
Only about 15% is converted per pass; the unreacted gases are recycled.
- A catalyst increases the rate, not the yield. It does not move the equilibrium.
- "Low temperature gives a higher yield" is only half the answer. Say that the rate would be too slow.
- Explain pressure with the number of gas molecules on each side of the equation.
You've got it
- Both reactions are exothermic and make fewer gas molecules.
- Haber: N₂ + 3H₂ ⇌ 2NH₃; about 450 °C, 200 atm, iron catalyst; unreacted gas recycled.
- Contact: 2SO₂ + O₂ ⇌ 2SO₃; about 450 °C, 1–2 atm, V₂O₅; SO₃ absorbed in concentrated H₂SO₄.
- Conditions are a compromise between yield, rate and cost.