Required practical 10: conditions and decay rate
Introduit| English | Sens |
|---|---|
| decomposition/ˌdiːkɒmpəˈzɪʃn/ | décomposition |
| biogas/ˌbaɪəʊˈɡæs/ | biogaz |
Milk that goes sour
- Leave milk out of the fridge on a summer day and it smells sour by evening. In the fridge it lasts a week.
- Bacteria break down fats in the milk into fatty acids, a kind of decomposition 腐解 — and they work faster when warm.
What affects decay
- Temperature: warmer speeds up decomposers' enzymes, up to a point.
- Water: decomposers need moisture. Oxygen: most decomposers respire aerobically.
Which conditions speed up decay?
Difficulté 2/5 · 140 pièces + un petit bonus lors de la première réussite aujourd'hui
Freezing slows decomposers.
Required practical 10
- Mix milk, sodium carbonate solution (alkaline) and a pH indicator such as phenolphthalein (pink), then add lipase. Keep tubes in water baths at different temperatures.
- Lipase breaks fats into fatty acids, the pH falls, and the indicator turns colourless. Time how long that takes.
Why does the indicator change colour in RP10?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Fatty acids are acidic.
The method, step by step
- Put 5 cm³ of milk, 7 cm³ of sodium carbonate solution and 5 drops of phenolphthalein in a test tube; put 1 cm³ of lipase in a second tube. Stand both in a water bath at the chosen temperature for 5 minutes, so they start at that temperature.
- Pour the lipase into the milk, start the stopwatch and stir. Stop it when the pink colour disappears (compare against a white tile). Do this three times at each of 10, 20, 30, 40, 50 and 60 °C, and find the mean time at each.
| Variable | In this practical |
|---|---|
| independent (you change) | temperature of the water bath |
| dependent (you measure) | time for the pink colour to disappear |
| control (keep the same) | volumes of milk, sodium carbonate, lipase and indicator; the same end-point colour |
Warmer decay is faster - up to a point
Decomposers' enzymes work faster as temperature rises, until high temperatures denature them. Keep the other conditions fixed when you compare decay rates.
In required practical 10, why are the milk mixture and the lipase put in the water bath separately for 5 minutes before mixing?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
If they were mixed while still at room temperature, the first part of the reaction would happen at the wrong temperature, and the time would not fit the bath temperature.
Worked example: rate at two temperatures
At 20 °C the colour change takes 200 s; at 40 °C it takes 50 s.
- Rate at 20 °C $= \dfrac{1}{200} = 0.005 \, \dfrac{1}{\text{s}}$.
- Rate at 40 °C $= \dfrac{1}{50} = 0.020 \, \dfrac{1}{\text{s}}$.
- Four times faster at 40 °C. Above about 40 °C the lipase starts to denature, so the rate drops (see the graph).

At 30 °C the change takes 80 s. What is the rate in 1/s?
Difficulté 2/5 · 140 pièces + un petit bonus lors de la première réussite aujourd'hui
1 ÷ 80 = 0.0125.
Why would the rate fall at 70 °C?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Enzymes have an optimum.
At 50 °C the pink colour disappears after 80 s. Calculate the rate as $\dfrac{1}{\text{time}}$, in 1/s.
Difficulté 2/5 · 140 pièces + un petit bonus lors de la première réussite aujourd'hui
$\dfrac{1}{80} = 0.0125$ per second: slower than at 40 °C (0.020), because the lipase starts to denature.
Using decay
- Gardeners make compost: warm, moist, well-aired heaps decay fast, making fertiliser.
- In anaerobic conditions, decay produces methane: biogas 生物气 generators turn waste into fuel.
What gas does a biogas generator produce for fuel?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Anaerobic decay makes methane.
Exam-style question
Question (6 marks): Plan an investigation into how temperature affects the rate of decay of fat in milk. Use milk, lipase, sodium carbonate solution and phenolphthalein.
A top-band answer includes:
- Measure out the same volumes each time (for example 5 cm³ milk, 7 cm³ sodium carbonate, 5 drops of indicator) with a measuring cylinder or syringe.
- Put the milk mixture and the lipase in separate tubes in a water bath at one temperature, and wait until they reach it.
- Mix them, start a stopwatch, and stop it when the pink colour disappears.
- Repeat at a range of temperatures (for example 10 to 60 °C), with three repeats at each, and find the mean time.
- Work out rate $= \dfrac{1}{\text{time}}$ and plot rate against temperature.
How it is marked: 6-mark answers are marked by level. The top level needs a full method someone else could follow, with a control variable and repeats. Common losses: no way of keeping the temperature steady; "see when it changes colour" without saying from pink to colourless; mixing the lipase in before the tubes reach the bath temperature.
Faster decay is not always better. Food stored warm decays fast, which wastes it. We slow decay on purpose by cooling, drying or removing oxygen.
Faster decay is always useful.
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
It spoils food.
Decay is faster when it is warm (up to the enzymes' optimum), moist and well aired. RP10 times the pH fall as lipase breaks down milk fat at different temperatures. Compost and biogas generators use decay.
Explain why a compost heap decays faster if it is turned regularly and kept damp.
Conditions for decomposers.