Kinetic and Static Friction
Introducido| English | Significado |
|---|---|
| static friction/ˈstætɪk ˈfrɪkʃn/ | fricción estática |
| kinetic friction/kɪˈnetɪk ˈfrɪkʃn/ | fricción cinética |
| coefficient of static friction/ˌkəʊɪˈfɪʃənt ɒv ˈstætɪk ˈfrɪkʃn/ | coeficiente de fricción estática |
It won't budge... then suddenly it slides
- Push a heavy crate gently and nothing happens; push harder and still nothing; push harder still — it lurches into motion.
- Before it moves, static friction 静摩擦 grows to match your push exactly.
- Once it slides, kinetic friction 动摩擦 takes over — usually a little weaker.
- Both come from surfaces gripping each other, and both act parallel to the surface.
Static friction adjusts itself
- Static friction prevents relative sliding between surfaces in contact; the object itself can still move, as in rolling.
- It grows to match the applied push, up to a maximum: $f_s \le \mu_s N$.
- Below that maximum the object stays put; the friction is only as big as it needs to be.
- $\mu_s$ is the coefficient of static friction 静摩擦系数, and $N$ is the normal force.
Which friction acts on an object that is being pushed but has no started to move?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Before sliding, static friction acts and grows to match the push, up to $\mu_s N$.
Kinetic friction is roughly steady
- Once sliding starts, kinetic friction acts: $f_k = \mu_k N$.
- It stays roughly constant no matter how fast the object slides.
- Usually $\mu_k < \mu_s$ — it takes more force to start sliding than to keep sliding.
- That is why the crate "breaks free" and then feels easier to push.

Friction on a slope
Raise the angle or the friction coefficient and see when the block finally starts to slide.
A sliding box has a normal force $N = 40\ \text{N}$ y $\mu_k = 0.3$. What is the kinetic friction force, in $\text{N}$?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
$f_k = \mu_k N = 0.3 \times 40 = 12\ \text{N}$.
For most surfaces, how do the coefficients compare?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Usually $\mu_s > \mu_k$, so it takes more force to break free than to keep sliding.
What friction depends on
- Kinetic friction and maximum static friction depend on the normal force $N$: $f_k=\mu_k N$ and $f_{s,max}=\mu_s N$.
- Press harder (larger $N$) and friction grows; that is why heavy things are hard to slide.
- Surprisingly, it barely depends on the contact area — a brick slides the same on any face.
- It does not depend on speed (for kinetic friction, to a good approximation).
The friction force depends strongly on the area of contact between the surfaces.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
To a good approximation friction depends on $\mu$ and the normal force, no the contact area.
Friction force is the coefficient $\mu$ times the ____ force.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
$f = \mu N$, where $N$ is the normal force pressing the surfaces together.
Select todos changes that increase the kinetic friction force on a sliding box.
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Fricción $= \mu_k N$: a larger normal force or rougher surfaces increase it. Contact area and speed barely matter.
Static friction is not always $\mu_s N$ — that is only its maximum. Below the slipping point, static friction equals whatever push it must balance ($f_s \le \mu_s N$). Also, friction barely depends on contact area, so a wider box is not "grippier".
A box presses on the floor with a normal force $N = 40\ \text{N}$, and $\mu_k = 0.3$.
- While sliding, kinetic friction is $f_k = \mu_k N = 0.3 \times 40 = 12\ \text{N}$.
- This $12\ \text{N}$ opposes the motion, whatever the box's speed.
Static friction ($f_s \le \mu_s N$) grows to prevent motion up to a maximum; kinetic friction ($f_k = \mu_k N$) opposes sliding and is roughly constant. Usually $\mu_s > \mu_k$. In this dry-friction model, kinetic friction and maximum static friction scale with the normal force; actual static friction adjusts below its maximum.
Write from the data: find the kinetic friction
- A sliding box has normal force 60 N and a kinetic-friction coefficient of 0.25.
- Find the kinetic friction.
A sliding box has a normal force of 60 N and a coefficient of kinetic friction of 0.25. What is the kinetic friction?
The box is sliding, so use kinetic friction: $F_f=\mu_k F_N=0.25(60\ \text{N})=15\ \text{N}$. This force opposes sliding relative to the floor. The 60 N normal force is not the friction force.
A sliding box has a normal force of 60 N and a coefficient of kinetic friction of 0.25. What is the kinetic friction?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
The box is sliding, so use kinetic friction: $F_f=\mu_k F_N=0.25(60\ \text{N})=15\ \text{N}$. This force opposes sliding relative to the floor. The 60 N normal force is not the friction force.