Skip to content

IGCSE Physics · November 2024 · Paper 63 · Difficulty 3 · Standard

Question 1

1

A student investigates the cooling of water in different sized beakers.

He uses the apparatus shown in Fig. 1.1.

Beaker A and beaker B have graduations as shown in Fig. 1.1.

(a)
(i)

Record room temperature $\theta_R$ shown on the thermometer in Fig. 1.1.

$\theta_R$ = °C[1]

(ii)

Describe one technique to use so that the temperature reading is as accurate as possible in this experiment.

[1]

(b)

The student pours an estimated volume of 75 cm$^3$ of hot water into beaker A. He uses the scale on the beaker as a guide.

He puts the thermometer into the water in beaker A and records, in Table 1.1, the temperature $\theta$ at time $t = 0$.

He records, in Table 1.1, the temperature of the water in beaker A every 30 s.

The student repeats the procedure for beaker B.

His readings are shown in Table 1.1.

Suggest one possible source of inaccuracy in the procedure, even if it is carried out carefully.

[1]

Table 1.1

beaker Abeaker B
$t$/s$\theta$/ °C$\theta$/ °C
082.580.0
3080.075.0
6078.072.0
9076.569.5
12075.067.0
15074.065.0
18073.063.5
(c)

Write a conclusion describing the effect of changing the size of the beaker on the rate of cooling of the hot water.

Justify your answer by reference to values from the results.

[2]

(d)

Students in other schools do the same experiment using identical apparatus.

State one variable that they need to control in order to obtain readings as close as possible to the readings in Table 1.1.

[1]

(e)

Calculate the average cooling rate $x$ for beaker B.

Use the readings for beaker B in Table 1.1 and the equation

$$x = \frac{\theta_0 - \theta_{180}}{T}$$

where $T = 180\text{ s}$ and $\theta_0$ and $\theta_{180}$ are the temperatures of the water in beaker B at $t = 0$ and $t = 180\text{ s}$.

Include the unit for the cooling rate.

$x$ = [2]

(f)
(i)

Another student thinks that more thermal energy is lost from the surface of the water in beaker B than from the sides of beaker B.

Suggest an additional experiment that she can do with beaker B to test her idea.

[1]

(ii)

Suggest how the cooling rate of the water in beaker B in this additional experiment compares with the value of $x$ in (e) if her idea is correct.

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • The thermometer reads $\mathbf{22}\,{}^\circ\mathrm{C}$.

1(a)(ii)

  • Read the scale $\textbf{at eye level}$, looking straight at it, to avoid parallax error.

1(b)

  • The beaker graduations are $\textbf{too far apart}$ to estimate $75\,\mathrm{cm^3}$ accurately.

1(c)

  • The water cools $\textbf{faster in the larger beaker B}$.
  • Use $\Delta\theta=\theta_0-\theta_{180}$. For B, $\Delta\theta=80.0\,{}^\circ\mathrm{C}-63.5\,{}^\circ\mathrm{C}=16.5\,{}^\circ\mathrm{C}$.
  • For A, $\Delta\theta=82.5\,{}^\circ\mathrm{C}-73.0\,{}^\circ\mathrm{C}=9.5\,{}^\circ\mathrm{C}$. B has the larger drop in the same $180\,\mathrm{s}$.

1(d)

  • Keep the $\textbf{starting temperature of the water}$ the same.

1(e)

  • Use $x = (\theta_0-\theta_{180})/T$.
  • $x = (80.0\,{}^\circ\mathrm{C}-63.5\,{}^\circ\mathrm{C})/(180\,\mathrm{s}) = \mathbf{0.0917}\,{}^\circ\mathrm{C/s}$.

1(f)(i)

  • Repeat the experiment with $\textbf{a lid covering beaker B}$, keeping the water volume and starting temperature the same.

1(f)(ii)

  • The cooling rate should be $\mathbf{<x}$, because the lid reduces energy loss from the surface.
  • If more energy was lost from the surface than from the sides, covering the surface should reduce the cooling rate to $\mathbf{<x/2}$.
Original question

Log in or create account

IGCSE, A-Level & AP