Skip to content

IGCSE Physics · November 2024 · Paper 53 · Difficulty 3 · Standard

Question 1

1

In this experiment, you will investigate the cooling of water in different sized beakers.

Refer to Fig. 1.1.

Fig. 1.1
(a)
(i)

Pour an estimated $75\text{ cm}^3$ of hot water into beaker A. Use the markings on the beaker as a guide.

Place the thermometer in the water in beaker A.

Record, in the first row of Table 1.1, the temperature $\theta$ of the water at time $t = 0$ and immediately start the stop-watch.

Record the temperature $\theta$ of the water at times $t = 30\text{ s}$, $t = 60\text{ s}$, $t = 90\text{ s}$, $t = 120\text{ s}$, $t = 150\text{ s}$ and $t = 180\text{ s}$.

Remove the thermometer from the beaker.[1]

(ii)

Repeat the procedure in (a)(i) for beaker B.[2]

(iii)

Suggest one possible source of inaccuracy in the procedure, even if it is carried out carefully.[1]

Table 1.1

beaker Abeaker B
$t /\text{ s}$$\theta /\ {}^\circ\text{C}$$\theta /\ {}^\circ\text{C}$
0
30
60
90
120
150
180
(b)

Write a conclusion describing the effect of changing the size of the beaker on the rate of cooling of the hot water.

Justify your answer by reference to values from your results.[2]

(c)

Students in other schools do the same experiment using identical apparatus.

State one variable that they need to control in order to obtain readings as close as possible to your readings.[1]

(d)

Calculate the average cooling rate $x$ for beaker B.

Use your readings for beaker B in Table 1.1 and the equation

$$x = \frac{\theta_0 - \theta_{180}}{T}$$

where $T = 180\text{ s}$ and $\theta_0$ and $\theta_{180}$ are the temperatures of the water in beaker B at $t = 0$ and $t = 180\text{ s}$.

Include the unit for the cooling rate.

$x =$ [1]

(e)
(i)

A student thinks that more thermal energy is lost from the surface of the water in beaker B than from the sides of beaker B.

Suggest an additional experiment that she can do with beaker B to test her idea.

You are not required to do this additional experiment.[1]

(ii)

Suggest how the cooling rate of the water in beaker B in this additional experiment compares with the value of $x$ in (d) if her idea is correct.[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Record the measured temperatures for beaker A at all seven times, to at least the nearest $1\,^\circ\mathrm{C}$. They should decrease as the water cools.

1(a)(ii)

  • Record the measured temperatures for beaker B at the same seven times. They should decrease as the water cools.
  • The temperature should fall more quickly in beaker B than in beaker A.

1(a)(iii)

  • The beaker scale has large divisions, so estimating $75\,\mathrm{cm^3}$ is difficult.

1(b)

  • Compare the temperature drop over $180\,\mathrm{s}$ for each beaker: subtract the final temperature from the starting temperature.
  • State which beaker cooled faster and quote both temperature drops to support your conclusion. The larger beaker B is expected to cool faster, but use your own readings.

1(c)

  • Keep the initial temperature of the water the same, because it affects the cooling rate.

1(d)

  • Use $x = (\theta_0 - \theta_{180})/T$, where $T = 180\,\mathrm{s}$.
  • Subtract your final beaker B temperature from its starting temperature, then divide by $180\,\mathrm{s}$. Give your result in $\mathrm{^\circ C/s}$.

1(e)(i)

  • Repeat the experiment with a lid on beaker B to reduce energy loss from the water surface.

1(e)(ii)

  • With a lid, the cooling rate should be $\mathbf{< x}$ because less energy escapes from the surface.
  • If the surface accounts for more than half the energy loss, covering it should reduce the cooling rate to $\mathbf{< x/2}$.
Original question

Log in or create account

IGCSE, A-Level & AP