Skip to content

IGCSE Physics · November 2024 · Paper 52 · Difficulty 5 · Stretch

Question 4

4

Hot water is poured into a glass beaker and allowed to cool down.

Plan an experiment to investigate how the rate at which the water cools depends upon the diameter of the water surface exposed to the air.

You are provided with:

  • a supply of hot water
  • a set of glass beakers of different sizes
  • a measuring cylinder.

You may use any other common laboratory apparatus.

You are not required to do this investigation.

In your plan, include:

  • any other apparatus needed
  • a brief description of the method, including what you will measure and how you will make sure your measurements are accurate
  • the key variables you will control
  • a results table to record your measurements (you are not required to enter any readings in the table)
  • how you will process your results to draw a conclusion.

You may include a labelled diagram if you wish.

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Use a thermometer, stopwatch and ruler. Measure the water surface diameter in each beaker. Use at least five different diameters.
  • Use the same volume and starting temperature of water each time. Measure the time for the water to cool through the same temperature drop.
  • Repeat each measurement and find the mean time. Record diameter $d/\mathrm{cm}$ and mean time $t/\mathrm{s}$ in a table.
  • Compare the mean times for the different diameters. A shorter time for the same temperature drop means a greater cooling rate.
Original question

Log in or create account

IGCSE, A-Level & AP