Skip to content

IGCSE Physics · November 2023 · Paper 42 · Difficulty 4 · Challenging

Question 6

6

Fig. 6.1 shows the circuit diagram for a flashlight (torch).

The electromotive force (e.m.f.) of the battery is 4.5V. The circuit contains a 60Ω fixed resistor. The current in the light-emitting diode (LED) is 0.020A.

(a)

Calculate the potential difference (p.d.) across the LED.

p.d. = [2]

(b)

Explain why the LED does not light up if the battery is reversed.

[1]

(c)

The chemical energy stored in the battery is 1050J.

Show that the flashlight operates for approximately 3h.[2]

(d)

Calculate the total charge that flows through the LED in 3600s.

charge = [2]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

6(a)

  • Use $V = IR$ for the resistor: $V_R = (0.020\,\mathrm{A})(60\,\mathrm{\Omega}) = 1.2\,\mathrm{V}$.
  • The series voltages add to the supply: $V_{\mathrm{LED}} = 4.5\,\mathrm{V} - 1.2\,\mathrm{V} = \mathbf{3.3}\,\mathrm{V}$.

6(b)

  • The LED only allows current in one direction, so reversing the battery stops the current.

6(c)

  • Use $E = IVt$, so $t = E/(IV)$.
  • $t = \frac{1050\,\mathrm{J}}{(0.020\,\mathrm{A})(4.5\,\mathrm{V})} = 11667\,\mathrm{s} = \mathbf{3.2}\,\mathrm{h}$, approximately $3\,\mathrm{h}$.

6(d)

  • Use $Q = It$.
  • $Q = (0.020\,\mathrm{A})(3600\,\mathrm{s}) = \mathbf{72}\,\mathrm{C}$.
Original question

Log in or create account

IGCSE, A-Level & AP